Huile graphite dégrippante View larger

De-block Graphite Oil

PRO-Tech

A very effective blend offering exceptional penetration that lubricates and dissolves rust. The graphite penetrating oil is recommended for releasing seized metallic parts such as screws, nuts, bolts, hinges, tools, gears, chains, locks, all materials used for fixing, aluminium and steel connectors, etc. Can be applied to all types of metal and to brake parts to avoid damage caused when releasing.

More details


Data sheet

Application domain cleaning, care and maintenance
Application area metallic surface, synthetic, plastic
Product type technical product - lubricant
Volume 500 ml
Packaging Box of 12 cans

More info


Description of the PRO-Tech De-block Graphite Oil

PRO-Tech De-block Graphite Oil is a mixture of fast rust solvents and lubricants that, due to its low surface tension, has tremendous penetrating properties and therefore perfectly able to loosen jammed components in the most impossible to reach locations. PRO-Tech De-block Graphite Oil is a product based on graphite. As a result, it is not onlystronger, but it also has a light lubricating effect for applications where required, such as in the case of stuck brake components and other oxidation sensitive components of, for example, a car, truck or trailer. The product is applicable to all types of metal. So it can also be used onsensitive connections, such as steel bolts in aluminium, to prevent damage when loosening. PRO-Tech De-block Graphite Oil has a directed spray pattern and can be used at any angle (360°).

 

Specifications of the PRO-Tech De-block Graphite Oil

 

  • Packaging: 500 ml
  • Composition: solvents, graphite-based oils, and slow evaporation additives
  • Appearance: black liquid
  • Propellant: CO2
  • VOC-EU g/l: 718 g/l
  • Relative density (20°C g/ml): 0.806
  • Vapour pressure at 20°C: 5.2 - 5.8 bar
  • Spray flow: +/- 2.0 g/sec

 

Applications of the PRO-Tech De-block Graphite Oil

  • Hinges and locks
  • Tools
  • Screw connections
  • Guide rails
  • Sprockets
  • Chains
  • Locks
  • Garden tools
  • Fixing materials
  • Spinning reels
  • (screws, bolts and nuts)
  • Hinges
  • Aluminium & steel joints

 

Product references

  • Good penetrating properties
  • Solves rust
  • Lubricating effect
  • Corrosion resistant
  • Moisture repellent
  • Contains graphite
  • Does not affect rubber
  • Fast working
  • Directed spray pattern360° valve

 

Physical and Chemical Properties

Contents : 500 ML

Base : Slowly evaporatingsolvents, oils and additives               

Appearance : Black liquid

Propellant : CO2

VOC-CH % : 89%

VOC-EU g/l : 718 g/l

Specific gravity (g/ml 20°C) : 0.806

Vapour pressure at 20°C : 5.2-5.8 bar

Spraying flow rate : +/- 2.0 g/sec

 

Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

The aerosol can should be at room temperature.

The ideal processing temperature is 5 to 30°C.

Shake the aerosol can before use.

Apply PRO-Tech De-block Graphite Oil on the desired surface and leave it on for approximately10 minutes.

Then loosen parts. Repeat treatment if necessary.

 

DANGEROUS. FOLLOW THE PRECAUTIONS.

 

Health and safety

CLP labelling with four pictograms.

DANGER

HYDROCARBURES, C9-C12, N-ALCANES, ISO-ALCENES, CYCLIQUES, AROMATES (2-25%%)
FATTY ACIDS, C18-UNSATD., TRIMERS COMPDS.WITH OLEYLAMINE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H372 Causes damage to organs through prolonged or repeated exposure (in contact with skin).
H411 Toxic to aquatic life with long lasting effects.

picto inflammablepicto dangereux

 

Safety Data Sheet