The aqueous phase formulation, with more than 25% water, makes HYDRO MARK FLUO more environmentally friendly. It offers similar performances to FLUO MARKER® (6-12months). Short-and medium-term tree marking for felling, marking for thinning, boundaries of temporary stands, wood stands during sales, log inventories, sawing product inventories, etc.
This product is no longer in stock
|Application domain||spray marking - wood, forests, plots, spray marking - gardeners, landscapers|
|Product type||marking paint - water based, marking paint - forestry marking, Fluorescent paint|
|Application area||wood, Concrete, Bitumen, gravel, Grass, minerals, plastic, sand, metallic surface, synthetic|
|Marking time||6 to 12 months|
|Packaging||Box of 12 cans|
DANGEROUS. FOLLOW THE PRECAUTIONS.
Binder: uses oil-based alkyd resins produced from the reuse of plant raw materials (flaxseed, rapeseed).
Pigments: mineral and organic, free from lead and cadmium.
Solvents: blend of water and alcohol, free from chlorinated solvents and aromatic compounds.
Propellant: dimethyl ether (DME).
Manually or using our purpose-designed application equipment (forestry grip), see bellow.
Before use (head up): shake vigorously
After use: purge head down.
Do not apply to wet surfaces or at temperatures below 5°C
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.
H223 Flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.