HYDROMARK is a water-based formulation (includes more than 25% water). It is especially suitable for medium- and long-term tree marking (1 to 2 years) and designation and stand boundary marking.
This product is no longer in stock
|Application domain||spray marking - wood, forests, plots|
|Marking time||1 to 2 years|
|Packaging||Box of 12 cans|
DANGEROUS. FOLLOW THE PRECAUTIONS.
Binder: specific polymers
Water: between 25% and 28% depending on the colour
Pigments: mineral and organic, lead and cadmium-free
Solvents: complex blend free from chlorinated solvents and without aromatic compounds
Propellant: dimethyl ether (DME)
Manually or using our purpose-designed application equipment (forestry grip), see bellow.
Before use (head up): shake vigorously
After use: purge head down.
Do not apply to wet surfaces or at temperatures below 5°C
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.
Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.