Industrial paint with metallic finish
Reference : PP 0401
Quick drying universal metal paint. Excellent adhesion and suitable for use on substrates such as metal, concrete, wood, masonry, etc. For best results, apply only to a carefully pre-treated surface.
Industrial paint with metallic finish
Description
Universal metallic paint, fast drying, excellent adhesion and suitable for application on substrates such as metal, concrete, wood, masonry, etc. Very suitable for minor repair and maintenance work. For the best result only apply on a well-prepared substrate.
Characteristics of Industrial Painting with Metallic Finish
- Beautiful metallic appearance and very good protection of the support
- For bare and galvanized metal. Coating on zinc and galvanized metal primers
- Finishing with a transparent varnish for even more durable results
- Ideal for machines, pumps, cabinets, etc.
- Available in silver aluminum and stainless steel
- Heat resistant (110°C to 200°C)
Applications
- Metal
- Masonry
- Concrete
- Wood
Product references
- Fast drying
- Excellent adhesion
- Very high covering ability
- High wear resistance
Physical and Chemical Properties
Silver :
- Contents : 500 ML
- Base : Acrylic resin
- Colour : Metallic Silver Aluminium
- VOC content : Approximately 91 m/m %
- Solids content : Approximately 9 m/m %
- Heat resistant : Up to 110°C
- Use : 1 to 2 m2 per layer, depending on object and processing method
- Drying time : at 23°C and rel. humidity 65%
- Dust-dry after 5 to 10 minutes
- Touch-dry after 10 to 20 minutes (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
Beige :
- Contents : 500 ML
- Base : Acrylic resin
- Colour : Metallic Beige stainless steel
- VOC content : Approximately 87 m/m %
- Solids content : Approximately 13 m/m %
- Heat resistant : Up to 200°C
- Use : 1 to 2 m2 per layer, depending on object and processing method
- Drying time : at 23°C and rel. humidity 65%
- Dust-dry after 5 to 10 minutes
- Touch-dry after 10 to 20 minutes
- Hardened/ resprayable after 2 hrs (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
PP 0401
Data sheet
- Product type
- touch up paint - industrial coating
- Application area
- Woods, Metal, Plastic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- retouch
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply in several thin layers. Before applying the next layer shake the aerosol can again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
Quick drying universal metal paint. Excellent adhesion and suitable for use on substrates such as metal, concrete, wood, masonry, etc. For best results, apply only to a carefully pre-treated surface.