Zinc Spray 97% Mat
Reference : PP 0203
The Galva Zinc Matt 97% is a paint very rich in zinc to prevent corrosion affecting bare steel and galvanised metal surfaces. Forms a protective coat that can also serve as a primer for any other type of paint. Can be used on all types of pipework. Very high conductivity, can be used for spot welding.
Zinc Spray 97% Mat
Description of the PRO-PAINT Zinc Spray 97% Matte
PRO-PAINT Zinc Spray 97% Matte is a matte and zinc rich spray coating. Prevents corrosion on iron and steel. The fast drying zinc layer forms an elastic and self-healing zinc film that can serve as a base layer for all types of paint. For maximum protection against corrosion. Application in steel construction and retouchingdamaged parts. For treating exhaust pipes, connectors, bends, pipes, etc. Because of its good conductivity very suitable for spot-welding. Heat resistant up to 350°C.
Properties of the PRO-PAINT Zinc Spray 97% Matte
- Very good adhesion, provides an excellent surface for painting
- Chemical-resistant
- Long-term electrochemical protection
- Heat resistant up to 350°C
- Dust dry after 10 to 15 minutes
- Touch dry after 20 to 30 minutes
- Leave to dry for 24 hours between coats
(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
Applications of the PRO-PAINT Zinc Spray 97% Matte
- Iron
- Steel
Product references
- Excellent cathodic corrosion protection
- Fast drying
- Resistant against petrol, chemicals and weather influences
- Good filling power
- Good spot-weldability (observe zinc vapour)
- Excellent adhesion
- The most used zinc spray/ cold galvaniser
Physical and Chemical Properties
- Contents : 500 ML
- Base : Epoxy ester
- Colour : Grey (matte)
- VOC content : Approximately54 m/m %
- Solids content : Approximately 46 m/m %
- Heat resistant : Up to 350°C
- Use : 1 to 2 m2 per layer, depending on object and processing method
- Drying time : at 23°C and rel. humidity 65%
- Dust-dry after 10 to 15 minutes
- Touch-dry after 20 to 30 minutes
- Hardened / resprayable after 24 hrs (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
Specifications of the Galva Zinc Matt 97%
Composition
Binder: epoxy ester
Pigments: zinc with a high degree of purity
Propellant: dimethyl ether
PP 0203
Data sheet
- Product type
- Galva paint
- Application area
- Metal
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- retouch
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply the zinc spray in several thin layers. Before applying the next layer, shake the aerosol can again. After drying, if desired a primer and a top coat can be applied. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.
The Galva Zinc Matt 97% is a paint very rich in zinc to prevent corrosion affecting bare steel and galvanised metal surfaces. Forms a protective coat that can also serve as a primer for any other type of paint. Can be used on all types of pipework. Very high conductivity, can be used for spot welding.