Fluorescent marking spray paint (180°)
Reference : PP 0004
The PRO-Paint fluorescent marking spray paint (180°) is a versatile and high quality marking paint that is highly visible from afar. This spray paint is equipped with a safety cap. Easy to use, it is ideal for marking, picketing, marking etc. It has a high covering power, and high weather and mechanical resistance.
Fluorescent marking spray paint (180°)
Description of the PRO-Paint Fluorescent marking spray paint (180°)
The PRO-Paint fluorescent marking spray paint (180°) is a very good visible marking paint. Multifunctional for construction and infrastructure to mark where holes must be drilled or where pipes have to be installed etc. Including safety cap. Lifespan of approx. 8-12 months, high covering ability, weather resistant and a high mechanical resistance. Suitable for application on substrates such as metal, concrete, stone, wood, masonry, gypsum blocks etc.
Characteristics of the PRO-Paint Fluorescent marking spray paint (180°)
- Essential aerosol in the world of geodesy
- Easy to use for marking, picketing, marking etc.
- Available in various colours
- 180° valve (head down)
- Visible for a long time
- Safety cover included
- One-handed operation
Applications of the PRO-Paint Fluorescent marking spray paint (180°)
- Metal
- Masonry
- Concrete
- Wood
- Dots
- Fence poles/ tunnels / with measuring equipment
Product references
- Fast drying
- 180˚ valve (can be used upside down)
- Fluorescent
- Safety cap
- Excellent adhesion
Physical and Chemical Properties
- Contents : 500 ML
- Base : Acrylic resin
- Colour : Luminous rose, luminous red, luminous orange, luminous yellow, luminous blue, luminous green, white, black, red and yellow
- VOC content : Approximately87 m/m %
- Solids content : Approximately13 m/m %
- Heat resistant : Up to 110°C
- Use : 1 to 2 m2 per 500ml, depending on substrate and application
- Drying time : at 23°C and rel. humidity 65%
- Dust-dry after 5 to 10 minutes
- Touch-dry after 10 to 20 minutes
- Hardened/ resprayable after 24 hrs (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
PP 0004
Data sheet
- Product type
- marking paint - construction, Non fluorescent paint, Fluorescent paint
- Application area
- Plaster, Synthetic, Plastic, Metal, Woods, Minerals, Sands, Gravels, Grass, Bitumens, Concrete
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Mapping, tracking, picketing
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. Cover the surrounding area if preferred. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Also, shake occasionally during use. You can use this aerosol can upside down. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The PRO-Paint fluorescent marking spray paint (180°) is a versatile and high quality marking paint that is highly visible from afar. This spray paint is equipped with a safety cap. Easy to use, it is ideal for marking, picketing, marking etc. It has a high covering power, and high weather and mechanical resistance.