Penetrating Oil
Reference : PT 0003
PRO-Tech Penetrating Oil is a very effective treatment to release rusted or seized parts such as locks, screws, nuts, hinges, metal fixings, etc. Product with a very high penetrating capacity and resistant to humidity and corrosion.
Penetrating Oil
Description of the PRO-Tech Penetrating Oil
High-quality, effective toolfor loosening stuck and rusted parts. Penetrating oil has good penetrating properties and contains graphite and MoS2. Penetrating oil is moisture repellent and corrosion-resistant. PRO-Tech Penetrating oil has a directed spray pattern and can be used at any angle.
Specifications of the PRO-Tech Penetrating Oil
- Packaging: 400 ml
- Composition: aliphatic and aromatic hydrocarbons, low viscosity mineral oils, anti-corrosion and graphite additives and MoS2
- Appearance: black liquid
- Propellant: propane-butane
- VOC-EU g/l: 652 g/l
- Relative density (20°C g/ml): 0.728
- Vapour pressure at 20°C: 2.0 - 2.6 bar
- Spray flow: 1.5 g/sec
Applications of the PRO-Tech Penetrating Oil
- Hinges / locks
- Tools
- Screw connections
- Guide rails
- Sprockets
- Chains
- Locks
- Garden tools
- Fixing materials
- Spinning reels (screws, bolts and nuts)
- Hinges
Product references
- Good penetrating properties
- Contains graphite and MoS2
- Moisture repellent
- Corrosion-resistant
- Directed spray pattern
- 360° valve
Physical and Chemical Properties
- Contents : 400 ML
- Base : Aliphatic and aromatic hydrocarbons, low viscosity mineral oils, anti-corrosion additives and graphite and MoS2
- Appearance : Black liquid
- Propellant : Propane-Butane
- VOC-CH % : 90%
- VOC-EU g/l : 652 g/l
- Specific gravity (g/ml 20°C) : 0.728
- Vapour pressure at 20°C : 2.0-2.6 bar
- Spraying flow rate : 1.5 g/sec
PT 0003
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature.
The ideal processing temperature is from 5 to 30°C.
Shake the aerosol can before use.
Apply penetrating oil and leave on for a while.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
HYDROCARBONS, C9-C11, N-ALKANES, ISOALKANES, CYCLICS, < 2%% AROMATICS
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
PRO-Tech Penetrating Oil is a very effective treatment to release rusted or seized parts such as locks, screws, nuts, hinges, metal fixings, etc. Product with a very high penetrating capacity and resistant to humidity and corrosion.