Silicone spray
Reference : PT 0002
A silicone spray lubricant designed for the lubrication and protection of metal, plastic and rubber parts. The product is water-repellent, pH neutral, weather-resistant and resistant to acids and alkalis. The silicone spray protects rubber elements from freezing and from drying out, and prevents certain parts from squeaking and cracking. It offers excellent mechanical and thermal stability.
Silicone spray
Description of the PRO-Tech Silicone Spray
PRO-Tech Silicone Spray to lubricate and protect of parts of metal, plastic and rubber. Silicone spray is water-repellent, pH neutral and resistant against weather influences and weak acids and alkalis. Silicone spray prevents freezing and drying out of rubber parts and the squeaking and cracking of plastic parts. Silicone spray has an excellent mechanical and thermal stability. PRO-Tech Silicone spray has a directed spray pattern and can withstand temperatures from - 50ºC to + 200ºC.
Specifications of the PRO-Tech Silicone Spray
- Packaging: 400 ml
- Composition: 1,000 cst silicone oil
- Appearance: colourless clear liquid
- Propellant: propane-butane
- VOC-EU g/l: 580 g/l
- Relative density (20°C g/ml): 0.659
- Vapour pressure at 20°C: 3 - 4 bar
- Spray flow: 1.5 g/sec
- pH: neutral
- Withstands temperatures: -50°C to +200°C
Applications of the PRO-Tech Silicone Spray
- Squeaky plastic parts
- Door rubbers
- Dashboards
- Bumpers
- Guide rails (caravan, sun blinds)
- Sunroofs
- Sliding doors
- Saw blades
- Tool for unloading moulds
Product references
- Excellent adhesion
- Water-repellent
- Prevents freezing and drying out of rubber parts
- Prevents squeaking and cracking of plastic parts
- Excellent mechanical and thermal stability
- Resistant against weather influences
- Resistant against weak acids and alkalis
- Directed spray pattern
Physical and Chemical Properties
- Contents : 400 ML
- Base : Silicon Oil (1,000 cSt)
- Appearance : Clear colourless liquid
- Propellant : Propane-Butane
- VOC-CH % : 88%
- VOC-EU g/l : 580 g/l
- Specific gravity (g/ml 20°C) : 0.659
- Vapour pressure at 20°C : 3-4 bar
- Spraying flow rate : 1.5 g/sec
- Temperature resistant : -50°C to +200°C
- pH value : Neutral
PT 0002
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C. Shake the aerosol can before use. Apply the silicone spray in a thin layer. The best lubrication is obtained after evaporation of the solvent (approximately 1 minute).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with three pictograms.
DANGER
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
A silicone spray lubricant designed for the lubrication and protection of metal, plastic and rubber parts. The product is water-repellent, pH neutral, weather-resistant and resistant to acids and alkalis. The silicone spray protects rubber elements from freezing and from drying out, and prevents certain parts from squeaking and cracking. It offers excellent mechanical and thermal stability.