Hammered Effect Finish Paint

Description of the PRO-Paint Hammered Effect Finish Paint

Professional premium paint with hammered effect, fast drying and excellent for use on substrates such as metal, aluminium, wood, stone, etc. The PRO-Paint Hammered Effect Finish Paint has a very high covering capability and is scratch and impact resistant. For the best result only apply on a well-prepared substrate. Lead and chromate free.

Properties of the PRO-Paint Hammered Effect Finish Paint

• Professional industrial paint with a hammered effect.
• Rustproofing
• Ideal for: machines, tools, street furniture.
• Inequalities disappear or are less visible because of the structure of the hammered hammer.
• Excellent covering power, scratch and impact resistance.

Applications of the PRO-Paint Hammered Effect Finish Paint

• Machines
• Metal
• Tools
• Wood
• Fencing

Product references

• Hammered effect
• Excellent adhesion
• Scratch and impact resistant
• Water-repellent and corrosion resistant
• Fast drying
• Very high covering ability

Physical and Chemical Properties

• Contents : 500 ML
• Base : Modified alkyd resin
• Colour : Silver, blue and green
• VOC content : Approximately 85 m/m %
• Solids content : Approximately 15 m/m %
• Heat resistant : Up to 110°C
• Use : 1 to 2 m² per layer, depending on object and processing method
• Drying time : at 23°C and rel. humidity 65%
• Dust-dry after 10 to 20 minutes
• Touch-dry after 30 to 60 minutes
• Hardened / resprayable after 24 hrs (Depending on ambient temperature, humidity and layer thickness)
• Storage  / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
• General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.

Instructions for use

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply in several thin layers. Apply the next layer/ layers within 30 minutes or wait until the previous layer has fully hardened. Before applying the next layer shake the aerosol again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

Safety Data Sheet