Hittlebestending
search
  • Hittlebestending

Heat-Resistant Paint

Reference : PP 0803

This PRO-Paint Heat-Resistant Paint is resistant to very high temperatures up to 750°C. It is ideal for bare or slightly rusty steel surfaces.

See product's full description

Heat-Resistant Paint

Color: Aluminium

Contact us

Description of the PRO-Paint Heat-Resistant Paint

Heat resistant coating for metal objects that are exposed to extremely high temperatures, such as stove pipes, exhaust pipes etc. Excellent adhesion and resistant against petrol, chemicals and all weather influences. Heat resistant up to approx. 650°C.

 

Properties of the PRO-Paint Heat-Resistant Paint

 

  • The protective layer is resistant to temperatures up to 750°C
  • For bare or slightly rusty steel surfaces
  • Ideal for engines, hot air guns, fans, etc...
  • Handy after about 30 minutes
  • Available in anthracite, black and aluminium
  • For use on white steel, new steel, blasted steel or on well prepared and coated surfaces such as stoves, barbecues, cooking tools, hot air guns, exhaust pipes, etc...

 

Applications of the PRO-Paint Heat-Resistant Paint

  • Metal
  • Masonry
  • Concrete
  • Wood
  • Stove (pipes)
  • Exhaust pipes

 

Product references

  • Excellent adhesion
  • Heat resistant
  • Resistant against weather influences, petrol and chemicals

  

Physical and Chemical Properties

Contents : 500 ML

Base : Silicon resin

Colour : Antracite, aluminium and black

VOC content : Approximately 85 m/m %

Solids content : Approximately 15 m/m %

Heat resistant : Up to 650°C

Use : 1 to 2 m2 per layer, depending on object and processing method

Drying time : at 23°C and rel. humidity 65%

Dust-dry after 5 to 10 minutes

Touch-dry after 10 to 15 minutes

Hardened/ resprayable after 30-60 minutes (on 200°C) (Depending on ambient temperature, humidity and layer thickness)

Storage  / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.

General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.

  

PRO-PAINT ASSORTIMENT FR

Download (630.37KB)

PRO-PAINT ASSORTIMENT NL

Download (632.21KB)

PRO-PAINT MERK BROCHURE FR

Download (1.65MB)

PRO-PAINT MERK BROCHURE NL

Download (1.67MB)

TI_PP0800_PP0803_EN

Download (212.04KB)

TI_PP0800_PP0803_FR

Download (215.39KB)

TI_PP0800_PP0803_NL

Download (213.75KB)

PP 0803

Data sheet

Product type
Heat resistant paint, touch up paint - industrial coating
Application area
Concrete, Woods, Metal, Plastic
Volume
500 ml
Packaging
Box of 12 cans
Application domain
retouch

Instructions for use

 

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Also shake occasionally during use. Apply at a distance of approximately 25 to 30 centimetres. After drying heat for 30 to 60 minutes at least 200°C to harden the paint layer. During the hardening process the paint will release fumes. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).