Primer
Reference : PP 0103
High quality universal primers, offering rapid drying and high coverage, ideal for surface preparation (metal, wood, plastic and many others) before paint-spraying. Can be used on bare steel and lightly rusted surfaces. Also suitable for plastic and wood.
Primer
Description of the PRO-Paint primer
High-quality, universal and fast drying primer with high filling power, based on a unique resin combination. Is excellent to use for making metal, wood, plastic and many other substrates ready to spray. Very good adhesion (both smooth as well as porous surfaces), filling and easy to sand.
Properties of the PRO-Paint primer
- Excellent adhesion (for both smooth and porous surfaces), covers well and is easy to sand.
- Corrosion-resistant
- Heat resistance: 110°C
- Dust dry after 10 to 15 minutes
- Touch dry after 15 to 25 minutes
- Leave to dry for 12 hours between coats
(Figures given for information only, actual data’s will depend on the temperature, paint thickness, humidity etc).
Applications of the PRO-Paint primer
- Substrate for priming
- For bare steel and slightly rusted surfaces
- Also suitable for plastic and wood
Product references
- Very high covering ability
- Excellent adhesion
- Very high filling ability
- Corrosion resistant
- Fast drying
Physical and Chemical Properties
- Contents : 500 ML
- Base : Acrylic Resin
- Colour : White, red brown and grey
- VOC content : Approximately 84 m/m %
- Solids content : Approximately 16 m/m %
- Heat resistant : Up to 110°C
- Use : 1 to 2 m2 per layer, depending on object and processing method
- Drying time : at 23°C and rel. humidity 65%
- Dust-dry after 10 to 15 minutes
- Touch-dry after 15 to 25 minutes
- Hardened / resprayable after 12 hrs
- (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source
Specifications of the primer
Composition
Binder: acrylic
Solvent: blend of solvents
Propellant: dimethyl ether
PP 0103
Data sheet
- Product type
- Adhesion primer, touch up paint - industrial coating
- Application area
- Woods, Metal, Plastic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Preparion of the supports, retouch
Instructions for use
- Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
- The surface must be clean, dry and free of grease. Remove all residues of varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas.
- Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
- Leave to dry for approximately 20 minutes between coats.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with three pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
High quality universal primers, offering rapid drying and high coverage, ideal for surface preparation (metal, wood, plastic and many others) before paint-spraying. Can be used on bare steel and lightly rusted surfaces. Also suitable for plastic and wood.