Quick-drying cold-galvanising paint for minor repairs, resulting in a shiny new-metal appearance.
This product is no longer in stock
|Application domain||touch-up painting|
|Application area||metallic surface|
|Product type||touch up paint - galvanizing|
|Packaging||Box of 12 cans|
PRO-Paint Zinc spray Alu fast drying is a fast drying cold galvaniser/ repair paint that ensures shine restorationof galvanised steel. It gives the appearance of new galvanised steel and is therefore ideal for minor maintenance work and repairs. Gives proper protection for bare steel and galvanised steel. Heat resistant to 110°.
(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
Contents : 500 ML
Base : Acrylate
Colour : Aluminium shine
VOC content : Approximately 90 m/m %
Solids content : Approximately 10 m/m %
Heat resistant : Up to 110°C
Use : 1 to 2 m2 per layer, depending on object and processing method
Drying time : at 23°C and rel. humidity 65%
Dust-dry after 5 to 10 minutes
Touch-dry after 10 to 20 minutes
Hardened / resprayable after 2 hrs (Depending on ambient temperature, humidity and layer thickness)
Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
Before use, carefully read the directions on the packaging and act accordingly.
The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 cm. Apply PRO-Paint Zinc spray Alu fast drying in several thin layers. Before applying the next layer, shake the aerosol can again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Pigments: zinc and aluminium with a high degree of purity
Propellant: dimethyl etherr
CLP labelling with two pictograms.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.