Vlekkencoating View larger

Stain Sealer

PRO-Paint

PRO-Tech Stain Sealer is a quick drying insulation, specially designed for the easy treatment of stains penetrating the substrate such as moisture stains, rust stains, soot deposits, grease, nicotine, tar and glue residues. White colour when dry and resistant to friction. For indoor and outdoor use.

More details


Data sheet

Application domain substrate preparation
Application area Concrete, wood, plasterwork
Product type Masking paint
Volume 500 ml
Packaging Box of 12 cans

More info


Description of the PRO-Tech Stain Sealer

Fast drying isolator, specially designed for easy treating of local, interior stainsin the substrate such as water stains, rust stains, carbon deposits, grease, nicotine, tar and glue residues. Dries white and is scrub resistant. For indoor and outdoor use.

 

Properties of the PRO-Tech Stain Sealer

  • The ideal product against recurring stains on walls, ceilings and wood.
  • White opaque and insulating coating.
  • Moisture stain mask, nicotine, tar, grease, ink and soot. Odourless and does not yellow.
  • Can be painted with standard wall paints.
  • Adheres to concrete, plaster, gypsum walls, etc.
  • Touch dry after only 10 minutes.
  • This renovation paint can be applied directly to system ceilings, plaster, cement, wood, concrete, wallpaper, insulating walls, old paint, etc.

 

Applications of the PRO-Tech Stain Sealer

  • Suspended ceilings
  • Concrete
  • Stucco
  • Wood
  • Plastered walls
  • Wallpaper
  • Cement
  • As a primer for wall paint and/ or PRO-Paint Spack Spray

 

Product references

  • Very strong insulation
  • Fast drying
  • High covering ability
  • Excellent adhesion
  • Scrub resistant
  • Ideally suited as primer for wall paint
  • Non-yellowing

 

Physical and Chemical Properties

  • Contents : 500 ML
  • Base : Acrylate
  • Colour : White (matte)
  • VOC content : Approximately 68 m/m %
  • Solids content : Approximately 32 m/m %
  • Smell : Typical
  • Use : 1 to 2 m2 per layer, depending on object and processing method
  • Drying time : at 23°C and rel. humidity 65%
  • Touch-dry after 5 to 10 minutes
  • Resprayable after 20 minutes (Depending on ambient temperature, humidity and layer thickness)
  • Storage/ Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
  • General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.

  

Instructions for use

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply in several thin layers. Apply the next layer/ layers within 30 minutes or wait until the previous layer has fully hardened. Before applying the next layer, shake the aerosol can again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

 

Safety Data Sheet