Line Marking Paint
Reference : PP 0663
PRO-Paint Line Marking Paint is ideal for delimiting surfaces, optimizing traffic, drawing lines indoors or outdoors: logistics warehouses, sports complexes, grassy fields, bicycle paths, car parks.
Line Marking Paint
Description of the PRO-Paint Line Marking Paint
PRO-Paint Line marker is a highly visible, fast drying marking paint with a very high wear resistance and an average lifespan of 1 to 2 years. Excellent covering ability. For line marking of parking spaces, floors and roads, warehouses, factories, recreational parks etc. Has a good resistance against petrol, chemicals and all weather influences. Applicable for use on most surfaces such as asphalt, stone, metal, concrete, wood etc.
Properties of the PRO-Paint Line Marking Paint
- Ideal for line marking (even long distances) in warehouses, car parks, garages, factories, sports fields, stadiums and in all situations where traffic lane marking is required
- Abrasion and friction resistant
- Very good adhesion on almost all surfaces
- Resistant to petrol, chemicals and weathering
Applications of the PRO-Paint Line Marking Paint
- Lines
- Wood
- Concrete
- Stone
- Asphalt
Product references
- Very high covering ability
- Long lasting adhesion
- Wear resistant
- To use in PRO-Paint accessories
- Fast drying
- Resistant against petrol, chemicals and weather influences
Physical and Chemical Properties
- Contents : 750 ML
- Base : Acrylic resin
- Colour : White/yellow/black/blue/orange/red/luminous pink
- VOC content : Approximately 70 m/m %
- Solids content : Approximately 30 m/m %
- Capacity : Approximately75 metres, depending on substrate and processing method
- Drying time : Hardened after 16 hrs (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
PP 0663
Data sheet
- Product type
- Line marking spray paint, Non fluorescent paint, Fluorescent paint
- Application area
- Synthetic, Metal, Woods, Bitumens, Concrete
- Marking time
- 12 months
- Volume
- 750 ml
- Packaging
- Box of 6 cans
- Application domain
- Ground signage
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Apply the marker spray in the desiredwidth. The aerosol can works 180° / can be used upside down. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
PRO-Paint Line Marking Paint is ideal for delimiting surfaces, optimizing traffic, drawing lines indoors or outdoors: logistics warehouses, sports complexes, grassy fields, bicycle paths, car parks.