Highly Resistant Line Marking Paint
Reference : PP 0620
The PRO-Paint Highly resistant line marking paint offers high resistance to fouling. It is recommended for high-demand areas: industrial sites, car parks, logistics warehouses, etc.
Highly Resistant Line Marking Paint
Description of the PRO-Paint Highly Resistant Line Marking Paint
PRO-Paint Highly Resistant Line Marking Paint is a long lasting line marking paint for indoor and outdoor lines, with excellent covering ability. Exceptionally suitable for the quick and easy lines on warehouse floors, factory sites, parking spaces and recreational parks etc. Dirt repellent and easy to clean! As a result the lines remain much more visible. Applicable for use on most surfaces such as concrete, asphalt, wood, stone, metal and bitumen. For the best result we recommend use in combination with the PRO-Paint 4-wheel line marker.
Features of the PRO-Paint Highly resistant line marking paint
- Ideal for marking high-demand surfaces, industrial sites, car parks, logistics warehouses
- Very high covering power
- For indoor and outdoor use
- Waterproof and easy to clean
- Wear-resistant
- Excellent adhesion on almost any surface
- Resistant to petrol, chemicals and weather influences
Applications of the PRO-Paint Highly Resistant Line Marking Paint
- Lines
- Wood
- Concrete
- Stone
- Asphalt
- Bitumen
Product references
- Very high covering ability
- 180˚ valve (can be used upside down)
- Long lasting adhesion
- Wear resistant
- Can be used in PRO-Paint accessories
- Fast drying
- Resistant against petrol, chemicals and weather influences
Physical and Chemical Properties
- Contents : 500 ML
- Base : Acrylic resin
- Colour : White and yellow
- VOC content : Approximately 70 m/m %
- Solids content : Approximately 30 m/m %
- Return OR yield OR efficiency : Approximately 50 metres, depending on substrate and processing method
- Drying time : Light traffic after 30 minutes
- Hardened after 16 hrs (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
PP 0620
Data sheet
- Product type
- Line marking spray paint, Non fluorescent paint
- Application area
- Synthetic, Metal, Woods, Bitumens, Concrete
- Marking time
- 12 months
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Ground signage
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Apply the marker spray in the desiredwidth. The aerosol can works 180° / can be used upside down. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The PRO-Paint Highly resistant line marking paint offers high resistance to fouling. It is recommended for high-demand areas: industrial sites, car parks, logistics warehouses, etc.