Highly Resistant Line Marking Paint


The PRO-Paint Highly resistant line marking paint offers high resistance to fouling. It is recommended for high-demand areas: industrial sites, car parks, logistics warehouses, etc.

More details

Data sheet

Application domain spray marking - line marking, ground signage
Product type marking paint - line marking, Non fluorescent paint
Application area Concrete, Bitumen, wood, metallic surface, synthetic
Marking time 1 year
Volume 500 ml
Packaging Box of 12 cans

More info

Description of the PRO-Paint Highly Resistant Line Marking Paint

PRO-Paint Highly Resistant Line Marking Paint is a long lasting line marking paint for indoor and outdoor lines, with excellent covering ability. Exceptionally suitable for the quick and easy lines on warehouse floors, factory sites, parking spaces and recreational parks etc. Dirt repellent and easy to clean! As a result the lines remain much more visible. Applicable for use on most surfaces such as concrete, asphalt, wood, stone, metal and bitumen. For the best result we recommend use in combination with the PRO-Paint 4-wheel line marker.


Features of the PRO-Paint Highly resistant line marking paint


  • Ideal for marking high-demand surfaces, industrial sites, car parks, logistics warehouses
  • Very high covering power
  • For indoor and outdoor use
  • Waterproof and easy to clean
  • Wear-resistant
  • Excellent adhesion on almost any surface
  • Resistant to petrol, chemicals and weather influences


Applications of the PRO-Paint Highly Resistant Line Marking Paint

  • Lines
  • Wood
  • Concrete
  • Stone           
  • Asphalt
  • Bitumen


Product references

  • Very high covering ability
  • 180˚ valve (can be used upside down)
  • Long lasting adhesion
  • Wear resistant                                                                                           
  • Can be used in PRO-Paint accessories
  • Fast drying
  • Resistant against petrol, chemicals and weather influences


Physical and Chemical Properties

  • Contents : 500 ML
  • Base : Acrylic resin
  • Colour : White and yellow
  • VOC content : Approximately 70 m/m %
  • Solids content : Approximately 30 m/m %
  • Return OR yield OR efficiency : Approximately 50 metres, depending on substrate and processing method
  • Drying time : Light traffic after 30 minutes        
  • Hardened after 16 hrs (Depending on ambient temperature, humidity and layer thickness)
  • Storage  / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
  • General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.


Instructions for use

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Apply the marker spray in the desiredwidth. The aerosol can works 180° / can be used upside down. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).



Safety Data Sheet