Road Paint
Reference : PP 0676
PRO-Paint Road Paint for marking roads, car parks and sidewalks on asphalt, tarmac and concrete. Resistant to a very large number of wheel arches.
Road Paint
Description of the PRO-Paint Road Paint
PRO-Paint Road Paint in a spray can is an industrial premium road paint, applicable on virtually all surfaces such as concrete, asphalt and pavers. Easy to apply using a brush or roller, but also exceptionally suitable for spray equipment. Has a very good adhesion without “bleeding” and a high covering ability.
Properties of the PRO-Paint Road Paint
- Highly insulating road paint
- Can be used on asphalt, concrete, slag, very open asphalt, etc.
- Easy to apply with a brush and/or roller
- Perfectly suited for airless sprayers
- Quick drying
- High fixed solid content
- Highly insulating and abrasion resistant
- High resistance to road salts
- Strong coverage without oozing
Applications of the PRO-Paint Road Paint
- Concrete
- Pavers
- Asphalt
- Many other common surfaces in infrastructure
Product references
- Optimal drying
- Easy to use
- Good elasticity and abrasion resistance
- High fixed solids content
- Good resistance against road salt
- Excellent adhesion to concrete and asphalt coating without bleeding
- In accordance with Construction Product Directive EU A-i-SG 500g/l
- Excellent resistance to (varying) weather conditions
Physical and Chemical Properties
- Contents : 7 KG
- Composition : Acrylic binder 15% (±2.0%)
- Weather resistant pigments 55% (±2.0%)
- Acetates (aromatic free) solvent 30% (±2.0%)
- VOC: <476 g/L
- Fixed solids content : weight 65% (±2.0%) volume 44% (±2.0%)
- Colour : white (RAL 9010), traffic yellow (RAL 1023), traffic red (RAL 3020), traffic blue (RAL 5017), traffic green (RAL 6024) and black (RAL 9005)
- Drying time : 25’ ASTM D711-75 at a quantity1000 g/m2 (hardened for traffic at temp. 20°C > +/- 30 minutes)
- Viscosity : 80 KU (± 5 KU) at 25°C
- Use : 400-500 gr. Per m2
- Relative density at 20°C : 1.42 (± 0.05)
- Shelf life : 12 months in original, unopened packaging, free fromextreme cold and extreme heat
PP 0676
Data sheet
- Product type
- Line marking spray paint
- Application area
- Concrete, Bitumens, Woods, Metal
- Packaging
- Per unit
- Application domain
- Ground signage
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
Remove all loose particles from the substrate, make sure the surface is dry, dust-free and free of grease. Small surfaces can be painted with a roller or brush. Can also be sprayed with both classic spray equipment for road paint as well as airless spray equipment. Spray gun: 4-6mm. Spray pressure 2.5-3 bar. Pressure on the paint (depending on the diameter and length of hoses) 1.5-2 bar. Airless nozzle: from 0.019. The paint is ready to use, but additions of ± 5% thinner do not adversely affect the drying process.
PRO-Paint Road Paint for marking roads, car parks and sidewalks on asphalt, tarmac and concrete. Resistant to a very large number of wheel arches.