Universal Gloss

PRO-Paint Rally

PRO-Paint Universal Gloss, silk gloss or matt varnish, quick drying and excellent for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering power and a long retention of colour/gloss. Scratch and impact resistant. For best results, apply only to a carefully pre-treated surface.

More details


Data sheet

Application domain touch-up painting
Product type touch up paint - industrial coating
Application area Concrete, wood, synthetic
Volume 500 ml
Packaging Box of 12 cans

More info


Description of the PRO-Paint Universal Gloss

Universal high-gloss, satin or matte paint, fast drying and excellent for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering ability and long colour retention and/or gloss retention. Scratch and impact resistant. For the best result only apply on a well-prepared substrate.

 

Applications of the PRO-Paint Universal Gloss

  • Metal
  • Masonry
  • Concrete
  • Wood
  • Glass
  • Stone
  • Plastics

 
Properties of the PRO-Paint Universal Gloss

  • Good covering power
  • Light and UV resistant
  • Durable chandelier
  • Wear and scratch resistant
  • Excellent adhesion
  • Long colour retention
  • Quick drying

 

Best results ?

  • Apply to the pre-treated surface
  • Ensure that the surface is clean, dry, free of rust and grease
  • Ideal processing temperature: 15-25°C
  • Shake well for 2 minutes and spray the sample at a distance of 25-30 cm
  • Apply in several thin coats
  • Shake the can before each coat
  • Clean the valve after use (return the box)

 

Physical and Chemical Properties

Contents : 500 ML

Base : Nitrocellulose and alkyd resins

Colour : Variouscolours, matte / high-gloss / silk-gloss

VOC content : Approximately 92 m/m %

Solids content : Approximately 8 m/m %

Heat resistant : Up to 90°C

Use : 1 to 2 m2 per layer, depending on object and processing method

Drying time : at 23°C and rel. humidity 65%

Dust-dry after 20 minutes

Touch-dry after 40 minutes

Hardened / resprayable after 1 hour (Depending on ambient temperature, humidity and layer thickness)

Storage  / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.

General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.

 

Instructions for use

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply in several thin layers. Before applying the next layer shake the aerosol again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

 

 

Safety Data Sheet