Wheelsilver Gloss Paint
Reference : PPRA 0205
Fast drying and excellent universal PRO-Paint Wheelsilver Gloss Paint for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering power and a long retention of colour/gloss. Scratch and impact resistant. For best results, apply only to a carefully pre-treated surface.
Wheelsilver Gloss Paint
Description of the PRO-Paint Wheelsilver Gloss Paint
Universal high-gloss, fast drying and excellent for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering ability and long colour retention and/or gloss retention. Scratch and impact resistant. For the best result only apply on a well-prepared substrate.
Applications of the PRO-Paint Wheelsilver Gloss Paint
- Metal
- Masonry
- Concrete
- Wood
- Glass
- Stone
- Plastics
PRO-Paint Wheelsilver Gloss Paint characteristics
- Good covering power
- Light and UV resistant
- Durable chandelier
- Wear and scratch resistant
- Excellent adhesion
- Long colour retention
- Quick drying
Best result?
- Apply to the pre-treated surface
- Ensure that the surface is clean, dry, free of rust and grease
- Ideal processing temperature: 15-25°C
- Shake well for 2 minutes and spray the sample at a distance of 25-30 cm
- Apply in several thin coats. Shake the can before each coat
- Clean the valve after use (return the box)
Physical and Chemical Properties
- Contents : 500 ML
- Base : Acrylic resin
- Colour : Silver
- VOC content : Approximately 90 m/m %
- Solids content : Approximately 10 m/m %
- Heat resistant : Up to 100°C
- Use : 1 to 2 m2 per layer, depending on object and processing method
- Drying time : at 23°C and rel. humidity 65%
- Dust-dry after 5 minutes
- Touch-dry after 30 minutes
- Hardened / resprayable after 1,5 hour (Depending on ambient temperature, humidity and layer thickness)
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.
PPRA 0205
Data sheet
- Product type
- touch up paint - industrial coating
- Application area
- Concrete, Woods, Metal, Synthetic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- retouch
Instructions for use
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply in several thin layers. Before applying the next layer shake the aerosol again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
Fast drying and excellent universal PRO-Paint Wheelsilver Gloss Paint for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering power and a long retention of colour/gloss. Scratch and impact resistant. For best results, apply only to a carefully pre-treated surface.