Fast drying and excellent universal PRO-Paint Wheelsilver Gloss Paint for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering power and a long retention of colour/gloss. Scratch and impact resistant. For best results, apply only to a carefully pre-treated surface.
This product is no longer in stock
|Application domain||touch-up painting|
|Application area||metallic surface, Concrete, wood, synthetic|
|Product type||touch up paint - industrial coating|
|Packaging||Box of 12 cans|
Universal high-gloss, fast drying and excellent for use on substrates such as metal, concrete, wood, masonry, glass, stone and various types of plastic. Has a very high covering ability and long colour retention and/or gloss retention. Scratch and impact resistant. For the best result only apply on a well-prepared substrate.
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and then sand. When using outside remove all moss and algae deposits. Cover the surrounding area. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply in several thin layers. Before applying the next layer shake the aerosol again. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).