View larger
Impregnation spray
PRO-Tech
A spray that impregnates the surface treated to provide optimum protection against humidity and prevent dirt becoming encrusted. Suitable for both porous and nonporous surfaces such as seals, natural stone and ceramic coatings. The invisible, waterproof yet air-permeable film created provides the treated surface with efficient and effective protection against dirt, oil and humidity.
Data sheet
| Application domain | cleaning, care and maintenance |
| Application area | Concrete, wood, plastic, metallic surface, synthetic, fabric |
| Product type | technical product - protection |
| Volume | 600 ml |
| Packaging | Box of 12 cans |
More info
Description of the PRO-Tech Impregnation spray
High-quality impregnation spray agent for protection against moisture and dirt adhesion. The unique formula creates an invisible, protective film layer. This ensures that the surface is oil and water repellent and the reattachment of dirt is effectively prevented. The product is air permeable.
Specifications of the PRO-Tech Impregnation spray
- Packaging: 600 ml net
- Composition: fluorocarbon
- Appearance: colourless clear liquid
- Propellant: propane-butane
- Relative density (20°C g/ml): 0.697
- Vapour pressure at 20°C: 3.7 - 4.3 bar
- Spray flow: 1.7 g/sec
- Drying time: approximately one hour
- VOC-EU g/l: 697 g/l
Applications of the PRO-Tech Impregnation spray
- Joints
- Porous and non-porous surfaces
- Natural stone
- Ceramics
- For indoor and outdoor use
- Bathrooms and kitchens
- Tents
- Shoes
- Sun blinds(Rain) clothing
- (Garden) furniture
Product references
- Water-repellent
- Does not stain
- Air permeable
- Invisible
- Prevents dirt adhesion
- Fast drying
- Long-term protection
- User-friendly
Physical and Chemical Properties
- Contents : 600 ML
- Base : Fluorocarbon
- Appearance : Clear colourless liquid
- Propellant : Propane-Butane
- VOC-CH % : 100%
- VOC-EU g/l : 697 g/l
- Specific gravity (g/ml 20°C) : 0.697
- Vapour pressure at 20°C : 3.7-4.3 bar
- Spraying flow rate : 1.7 g/sec
- Drying time : Approximately 1 hour
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature.
The ideal processing temperature is from 5 to 30°C.
Shake the aerosol can before use.
The surfacemust be clean and dry.
Spray the parts to be treated in thin layers with an interim drying time of 5 to 10 minutes
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with three pictograms.
DANGER
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
