Primer zinkfosfaat View larger

Primer Zinc Phosphate


PRO-Tech Primer Zinc Phosphate is a matt, filling primer based on a zinc phosphate pigment. It offers protection against corrosion on bare iron and bare steel and is very fast drying. This makes this product extremely suitable for production and construction work. The primer also adheres to zinc, aluminium, non-ferrous metals and old coatings. Heat resistant up to 120°C.

More details

Data sheet

Application domain cleaning, care and maintenance, touch-up painting
Product type technical product - protection, primer / undercoat
Application area metallic surface
Volume 400 ml
Packaging Box of 12 cans

More info

Applications of the PRO-Tech Primer Zinc Phosphate

  • Iron
  • Steel
  • Old coatings
  • Non-ferrous metals


Properties of the PRO-Tech Primer Zinc Phosphate

High-quality, matt, filling primer based on zinc phosphate pigment. Protects against corrosion on bare iron and steel. Excellent adhesion to zinc, aluminium, non-ferrous metals and old coatings. The primer dries very quickly. Ideal for production and construction work.


PRO-Tech Primer Zinc Phosphate references

  • Fast drying
  • Good filling power
  • Superfast zinc primer
  • Excellent adhesion
  • Resistant against petrol, chemicals and weather influences


Physical and Chemical Properties

  • Contents : 400 ML
  • Base : Acrylate
  • Colour : Grey (matt)
  • VOC content : Approximately 81,5 m/m %
  • Solids content : Approximately 18,5 m/m %
  • Heat resistant : Up to approximately 120°C
  • Use : 1 to 2 m2 per layer, depending on object and processing method
  • Drying time : at 23°C and relative humidity 65%
  • Dust-dry after 5 to 10 minutes
  • Touch-dry after 10 to 20 minutes
  • Hardened / resprayable after 4 hrs (Depending on ambient temperature, humidity and layer thickness)
  • Storage  / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
  • General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in the full sun apply.


Instructions for use

Before using the PRO-Tech Primer Zinc Phosphate, carefully read the instructions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. The aerosol can should be at room temperature. The ideal processing temperature is from 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetres. Apply the zinc phosphate primer apply in several thin layers. Before applying the next layer, shake the aerosol again. After drying, if desired, the finishing coat can be applied. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).



Safety Data Sheet