Speedwax
Reference : PT 4000
PRO-Tech Speedwax is the ideal way to obtain a rapid yet long-lasting shine and protection for any lacquered, chromium-plated or synthetic surface. Removes light oxidation and signs of wear, slight marks and bituminous residues or splashes. Can be used on synthetic materials, bumpers, wheel rims, hubcaps, etc.
Speedwax
Description of the PRO-Tech Speedwax
PRO-Tech Speedwax is a high-quality spray to quickly obtain a lasting shine and protection. You effortlessly create protection and shine on lacquered, plastic and chromed parts. Removes light oxidation/weathering, light stains and bitumen residue.
Specifications of the PRO-Tech Speedwax
- Packaging: 500 ml
- Base: blend of natural and synthetic products, silicone oils, solvents and slow-evaporation additives
- Appearance: pale yellow grease
- Propellant: propane-butane
- VOC-EU g/l: 241 g/l
- Relative density (20°C g/ml) : 0.864
- Vapour pressure at 20°C : 2.5 - 3.1 bar
- Spray flow : 1.8 g/sec
Applications of the PRO-Tech Speedwax
- Cars, caravans, boats etc.
- (Painted) plastic
- Bumpers, spoilers, bodywork
- Chrome
- Rims, hubcaps
Product references
- Easy to use
- Reduces dirt adhesion
- Water-repellent
- Protection against weather influences
- Lasting shine
- Non-polishing
- Antistatic
- Has silicone
- Misty spray pattern
Physical and Chemical Properties
- Contents : 500 ML
- Base : Mix of natural and synthetic wash, silicone oils, slowly evaporating solvents and additives
- Appearance : Yellow grease
- Propellant : Propane-Butane
- VOC-CH % : 29%
- VOC-EU g/l : 241 g/l
- Specific gravity (g/ml 20°C) : 0.864
- Vapour pressure at 20°C : 2.5-3.1 bar
- Spraying flow rate : 1.8 g/sec
PT 4000
Data sheet
- Product type
- Protection spray
- Application area
- Metal, Plastic, Synthetic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature. The ideal processing temperature is 5 to 30°C. Shake the aerosol can before use. The surface must be clean and dry. Apply PRO-Tech Speedwax in a thin, even layer. distribute with a soft cloth and leave for a few seconds. After that, polish with a clean cloth.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with one pictogram.
DANGER
MIXTURE OF: 5-CHLORO-2-METHYL-4-ISOTHIAZOLIN-3-ONE [EC NO. 247-500-7] AND 2-METHYL-2HISOTHIAZOL-3-ONE [EC NO. 220-239-6] (3:1)
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
PRO-Tech Speedwax is the ideal way to obtain a rapid yet long-lasting shine and protection for any lacquered, chromium-plated or synthetic surface. Removes light oxidation and signs of wear, slight marks and bituminous residues or splashes. Can be used on synthetic materials, bumpers, wheel rims, hubcaps, etc.