Seal & Bond Remover
Reference : PT 0134
The Soppec PRO TECH mastic and adhesive remover dissolves glue, tar, mastic and silicone residues easily and quickly. The ideal
solution for degreasing surfaces prior to other treatment. Will leave the majority of painted surfaces and synthetic materials undamaged, leaves no residue.
Seal & Bond Remover
Description of the PRO-Tech Seal & Bond Remover
PRO-Tech Seal & Bond Remover is a premium product for softening and removing many adhesives and sealants. Even silicone residues are no problem at all. Ideal for degreasing surfaces before proceeding with further work. The product does not affect most types of paint and plastic and evaporates without leaving residues.
Specifications of the PRO-Tech Seal & Bond Remover
- Packaging: 500 ml
- Composition: blend of aromatic and aliphatic hydrocarbons and alcohols
- Appearance: colourless clear liquid
- Propellant: CO2
- VOC-EU g/l: 774 g/l
- Relative density (20°C g/ml): 0.794
- Vapour pressure at 20°C: 5.2 - 5.8 bar
- Spray flow: 3.4 g/sec
Applications of the PRO-Tech Seal & Bond Remover
- Various sealant residues
- Chewing gum residue
- Glued car windows
- Adhesive and bitumen residue
Product references
- Sealant and adhesive remover
- Easyapplication
- Ideal for degreasing surfaces
- Does not affect most types of paint and plastic
- Removes unhardened PU residue and chewing gum
- Directed spray pattern
- 360° valve
Physical and Chemical Properties
- Contents : 500 ML
- Base : Mix of aliphatic, aromatic hydrocarbons and alcohols
- Appearance : Clear colourless liquid
- Propellant : CO2
- VOC-CH % : 98%
- VOC-EU g/l : 774 g/l
- Specific gravity (g/ml 20°C) : 0.794
- Vapour pressure at 20°C : 5.2-5.8 bar
- Spraying flow rate : 3.4 g/sec
PT 0134
Data sheet
- Product type
- Cleaner
- Application area
- Plaster, Synthetic, Plastic, Metal, Woods, Bitumens, Concrete
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
Shake aerosol can well before use. The ideal processing temperature is 5 to 30°C. Apply on a clean, dry cloth and treat the surface. Leave on for a few minutes and subsequently remove the residue. Repeat the treatment if required, especially for thick, tough layers of adhesive. Cover paintedand plastic parts. Always test first!
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
DEAROMATIZED HYDROCARBONS
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
The Soppec PRO TECH mastic and adhesive remover dissolves glue, tar, mastic and silicone residues easily and quickly. The ideal
solution for degreasing surfaces prior to other treatment. Will leave the majority of painted surfaces and synthetic materials undamaged, leaves no residue.