Nettoyant colle et mastic View larger

Seal & Bond Remover

PRO-Tech

The Soppec PRO TECH mastic and adhesive remover dissolves glue, tar, mastic and silicone residues easily and quickly. The ideal
solution for degreasing surfaces prior to other treatment. Will leave the majority of painted surfaces and synthetic materials undamaged, leaves no residue.

More details


Data sheet

Application domain cleaning, care and maintenance
Application area Concrete, Bitumen, wood, metallic surface, plastic, synthetic, plasterwork
Product type technical product - cleaner
Volume 500 ml
Packaging Box of 12 cans

More info


Description of the PRO-Tech Seal & Bond Remover

PRO-Tech Seal & Bond Remover is a premium product for softening and removing many adhesives and sealants. Even silicone residues are no problem at all. Ideal for degreasing surfaces before proceeding with further work. The product does not affect most types of paint and plastic and evaporates without leaving residues.

 

Specifications of the PRO-Tech Seal & Bond Remover 

  • Packaging: 500 ml
  • Composition: blend of aromatic and aliphatic hydrocarbons and alcohols
  • Appearance: colourless clear liquid
  • Propellant: CO2
  • VOC-EU g/l: 774 g/l
  • Relative density (20°C g/ml): 0.794
  • Vapour pressure at 20°C: 5.2 - 5.8 bar
  • Spray flow: 3.4 g/sec

 

Applications of the PRO-Tech Seal & Bond Remover

  • Various sealant residues
  • Chewing gum residue
  • Glued car windows
  • Adhesive and bitumen residue

 

Product references

  • Sealant and adhesive remover
  • Easyapplication
  • Ideal for degreasing surfaces
  • Does not affect most types of paint and plastic
  • Removes unhardened PU residue and chewing gum
  • Directed spray pattern
  • 360° valve

 

Physical and Chemical Properties

  • Contents : 500 ML
  • Base : Mix of aliphatic, aromatic hydrocarbons and alcohols
  • Appearance : Clear colourless liquid
  • Propellant : CO2
  • VOC-CH % : 98%
  • VOC-EU g/l : 774 g/l
  • Specific gravity (g/ml 20°C) : 0.794
  • Vapour pressure at 20°C : 5.2-5.8 bar
  • Spraying flow rate : 3.4 g/sec

 

Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

Shake aerosol can well before use. The ideal processing temperature is 5 to 30°C. Apply on a clean, dry cloth and treat the surface. Leave on for a few minutes and subsequently remove the residue. Repeat the treatment if required, especially for thick, tough layers of adhesive. Cover paintedand plastic parts. Always test first!

 

DANGEROUS. FOLLOW THE PRECAUTIONS.

 

Health and safety

CLP labelling with two pictograms.

DANGER

DEAROMATIZED HYDROCARBONS
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Safety Data Sheet