Nettoyant mousse polyuréthane View larger

PUR Cleaner

PRO-Tech

The PRO-Tech PUR Cleaner is designed to remove fresh PUR (polyurethane) foam after general work operations. It will also remove glue, wax, grease and oil residues, etc. It includes a spray and additional connector designed for using to clean a PUR spray gun thus extending its working life.

More details


Data sheet

Application domain cleaning, care and maintenance
Application area Concrete, Bitumen, wood, plastic, plasterwork, metallic surface, synthetic
Product type technical product - cleaner
Volume 400 ml
Packaging Box of 12 cans

More info


Description of the PRO-Tech PUR Cleaner

PRO-Tech PUR cleaner is a highly active agent for removing fresh, non-hardened polyurethane foam (PUR foam), glue, wax, grease, oil, etc. supplied with a nebuliser as an NBS connection for cleaning PUR guns.

 

Specifications of the PRO-Tech PUR Cleaner

  • Packaging: 400 ml
  • Composition: acetone
  • Appearance: colourless clear liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 715 g/l
  • Relative density (20°C g/ml): 0.715
  • Vapour pressure at 20°C: 3.1 bar
  • Spray flow: 2.5 g/sec

 

Applications of the PRO-Tech PUR Cleaner

  • PUR foam remains (not hardened)
  • Grease and oil
  • Clean dosing guns
  • Various glues on PU base (not hardened)
  • Tools

 

Product references

  • Easy application
  • Excellent cleaner for dosing guns
  • Removes fresh PUR foam                                             

 

Physical and Chemical Properties

  • Contents : 400 ML
  • Base : Acetone
  • Appearance : Clear colourless liquid
  • Propellant : Propane-Butane
  • VOC-CH % : 100%
  • VOC-EU g/l : 715 g/l
  • Specific gravity (g/ml 20°C) : 0.715
  • Vapour pressure at 20°C : 3.1 bar
  • Spraying flow rate : 2.5 g/sec

 

Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

The ideal processing temperature is from 5 to 30°C. Painted and plastic surfaces can be sensitive to PUR Cleaner. Always test first!

Remove fresh PUR foam

Place the spray cap/nebuliser on the valve of the can. Keep the can straight. Spray amply on the remaining foam. Leave for a few minutes and after that remove the foam. Repeat the treatment if necessary.

Clean dosing gun

Screw the aerosol can on the adapter of the dosing gun (do not fit the nebuliser) and pull the trigger of the gun several times so it fills with the PUR cleaner and until no more foam comes out of the gun. Leave the PUR cleaner for approximately 10 minutes and spray the gun once more.

 

DANGEROUS. FOLLOW THE PRECAUTIONS.

 

Health and safety

CLP labelling with a single pictogram.

DANGER

ACETONE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Safety Data Sheet