Reference : PT 00010
A rapid, easy to use spray wax for all metallic surfaces such as stainless steel, Trespa, brass, copper, chrome and precious metals. It can also be used on synthetic surfaces (whether lacquered or not). Ensures a beautiful glossy finish.
The SOPPEC TRACING® PRO Floor Line Marking Paint was designed to secure workplace safety through safety signage compliance, for yourself, your employees, your visitors and clients.
The low profile design and the central position of the drawbar provide a strong stability , and minimize the user interferences during the application. It can be used either on smooth (concrete) or uneven surfaces (asphalt).
The wheels with wide tread (32 mm) and long wheelbase secure straight running.
The spray zone is sheltered and optimized so that the sprayed paint is not disrupted . A wind shield (Optional) further increases protection in case of challenging weather conditions.
The ad hoc design provides the user with a clear seight of the marking target and of the line marking area.
The compact shape allows markings up to 60 mm of a frontal obstacle and 79 mm of a side obstacle
The marking width is adjustable continuously from 5 to 12 cm.
The trolley set up is done with no tools : you just need to position the drawbar and the aerosol holder, and to tighten the 2 fixing nuts by hands.
The SOPPEC DRIVER™ trolley can be convertible into a Tape Applicator (Conversion kit available in September 2021).
The aerosol can positionning is very intuitive thanks to the exclusive SOPPEC PureSPRAY™ nozzle holder.
One spare aerosol can shall be stored in its slot to allow 180 m auntonomy on smooth surface for 75 mm wide line.
Storable in a minute, you can swing the trolley on its front side with the back handle and set up the drawbar backwards.
Intuitive
3 years warranty
Maintenance free
Straight line marking
For smooth or uneven surfaces
Convertible
It is the very unique combination of a paint formulation with more pigments, the exclusive design of the combo « aerosol + spray nozzle + trolley » which secures a pure line, with no need of flanges or other tweaks to keep the line edge quality under control.
The trolley does not require cleaning after use.
The pressure level within the aerosol can along with the spray system were designed to provide fast and high coverage marking. The Optimal Application Speed of the SOPPEC PureSPRAY™ system is the highest on the market.
Using the SOPPEC DRIVER™ application trolley and the SOPPEC TRACING® PRO paint spray cans, you proceed with 500 m within 30 minutes, and you don’t have to clean the equipment.
The SOPPEC PureSPRAY® system is providing you with a precise marking with no side-spray.
It is 40% faster to use than its closest competitor.
Data sheet
A rapid, easy to use spray wax for all metallic surfaces such as stainless steel, Trespa, brass, copper, chrome and precious metals. It can also be used on synthetic surfaces (whether lacquered or not). Ensures a beautiful glossy finish.
