Spray Lustrant View larger

Polish Spray


A rapid, easy to use spray wax for all metallic surfaces such as stainless steel, Trespa, brass, copper, chrome and precious metals. It can also be used on synthetic surfaces (whether lacquered or not). Ensures a beautiful glossy finish.

More details

Data sheet

Application domain cleaning, care and maintenance
Product type technical product - cleaner
Application area plastic, metallic surface, synthetic
Volume 500 ml
Packaging Box of 12 cans

More info

Description of the PRO-Tech Polish Spray

PRO-Tech Polish Spray is ideally suited for quick and easy cleaning of all hard closed surfaces. Easy and economical to use. Gives a very nice shine.


Specifications of the PRO-Tech Polish Spray

  • Packaging: 500 ml
  • Composition: silicone and tensioactive substances
  • Appearance: thick white liquid
  • Propellant: DME
  • VOC-EU g/l: 839 g/l
  • Relative density (20°C g/ml): 0.842


Applications of the PRO-Tech Polish Spray

  • Stainless steel
  • Trespa         
  • Brass
  • (Painted) plastic
  • Copper
  • Chrome
  • Many other precious metals
  • Cars, boats, bumpers


Product references

  • Easy to use
  • Reduces dirt adhesion
  • Water-repellent
  • Protection against weather influences
  • Lasting shine
  • Non-polishing
  • Antistatic
  • Has silicone
  • Misty spray pattern


Physical and Chemical Properties

  • Contents : 500 ML
  • Base : Mix of natural and synthetic wash, silicone oils, slowly evaporating solvents and additives
  • Appearance : Yellow brown grease
  • Propellant : Propane-Butane
  • VOC-CH % : 29%
  • VOC-EU g/l :  241 g/l
  • Specific gravity (g/ml 20°C) : 0.864
  • Vapour pressure at 20°C : 2.5-3.1 bar
  • Spraying flow rate : 1.8 g/sec


Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

The aerosol can should be at room temperature. The ideal processing temperature is 5 to 30°C. Shake the aerosol can before use. The surface must be clean and dry. Apply PRO-Tech Polish spray in a thin, even layer. distribute with a soft cloth and leave for a few seconds. After that, polish with a clean cloth.




Health and safety

CLP labelling with one pictogram.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

picto inflammable


Safety Data Sheet