Drilling and Cutting Oil
Reference : PT 0107
Professional tapping and cutting oil prevents metal overheating during boring, cutting, grinding, milling, sawing, sanding and planning, etc. It protects and lubricates tools, reducing wear and increasing working speed, saving both money and time.
Drilling and Cutting Oil
Description of the PRO-Tech Drilling and Cutting Oil
PRO-Tech Drilling and Cutting Oil is a pure, undiluted high-quality oil to preventoverheating of metal whendrilling and cutting work. Easy to use for common machining work. PRO-Tech Drilling and Cutting Oil has a directed spray pattern and can be used at any angle (360°).
Specifications of the PRO-Tech Drilling and Cutting Oil
- Packaging: 400 ml
- Composition: mineral oils with extreme pressure (EP) and anti-wear (AW) additives
- Appearance: light brown oil
- Propellant: propane-butane
- VOC-EU g/l: 161 g/l
- Relative density (20°C g/ml): 0.807
- Vapour pressure at 20°C: 3.3 - 3.9 bar
- Spray flow: +/- 2.0 g/sec
Applications of the PRO-Tech Drilling and Cutting Oil
- Cutting
- Sawing
- Drilling
- Tapping
- Machining
- Grinding
- Milling
- Punching
- Planing
Product references
- Protects and lubricates tools
- Reduces wear of tools
- Makes higher speeds possible > time savings
- Silicon-free
- Non-corrosive
- 360° valve
Physical and Chemical Properties
Contents : 400 ML
Base : Mineral oils with extreme pressure (EP) and anti-wear (AW) additives
Appearance : Light brown oil
Propellant : Propane-Butane
VOC-CH % : 20%
VOC-EU g/l : 161 g/l
Specific gravity (g/ml 20°C) : 0.807
Vapour pressure at 20°C : 3.3 - 3.9 bar
Spraying flow rate : +/- 2.0 g/sec
PT 0107
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance, Preparion of the supports
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C. Shake aerosol can well before use. Spray the tools and the material amplybeforeprocessing. It is important that both the tools and the material remain damp.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H411 Toxic to aquatic life with long lasting effects.
Professional tapping and cutting oil prevents metal overheating during boring, cutting, grinding, milling, sawing, sanding and planning, etc. It protects and lubricates tools, reducing wear and increasing working speed, saving both money and time.