Contact Spray
Reference : PT 0122
A combined cleaner and lubricant oil that not only offers high quality protection but can also dissolve rust. It guarantees a long operational life for electrical appliances and less downtime. The contact cleaner lubricant spray is non-corrosive, eliminates dirt and improves conductivity. It reduces mechanical resistance and provides long-term protection against humidity.
Contact Spray
Description of the PRO-Tech Contact Spray
PRO-Tech Contact Spray is a rust-dissolving contact cleaning agent combined with a premium sliding and protective oil. It guarantees a durable, trouble-free operation of electric devices. PRO-Tech Contact spray loosens dirt and removes interfering contact resistances. Reduces the mechanical resistance and provides long-term protection against moisture and rust. Ideal for plugs, switches, controllers etc. especially against weather influences. PRO-Tech Contact spray has a directed spraying pattern and can be used at any angle (360°).
Specifications of the PRO-Tech Contact Spray
- Packaging: 400 ml
- Composition: aliphatic hydrocarbons and mineral oil
- Appearance: colourless clear liquid
- Propellant: propane-butane
- VOC - CH%: 93%
- VOC-EU g/l: 645 g/l
- Relative density (20°C g/ml): 0.694
- Vapour pressure at 20°C: 1.8 - 2.4 bar
- Spray flow: 2.1 g/sec
Applications of the PRO-Tech Contact Spray
- Switches
- Sockets of integrated circuits
- Plugs/ sockets
- Batteries
- Contacts
- Connectors
Product references
- Dissolves oxides
- Directed spray pattern
- Strong solvent action
- 360° valve
- Non-corrosive
Physical and Chemical Properties
- Contents : 400 ML
- Base : Aliphatic hydrocarbons and mineral oil
- Appearance : Clear colourless liquid
- Propellant : Propane-Butane
- VOC-CH % : 93%
- VOC-EU g/l : 645 g/l
- Specific gravity (g/ml 20°C) : 0.694
- Vapour pressure at 20°C : 1.8-2.4 bar
- Spraying flow rate : 2.1 g/sec
PT 0122
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature. The ideal processing temperature is 5 to 30°C. Shake the aerosol can before use. Always switch off the power before spraying on electronic equipment. Aim the aerosol can at the surface to be cleaned and spray. After the treatment, wait until the product has fully evaporated (+/- after 15 minutes) before switching on the power.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with three pictograms.
DANGER
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
A combined cleaner and lubricant oil that not only offers high quality protection but can also dissolve rust. It guarantees a long operational life for electrical appliances and less downtime. The contact cleaner lubricant spray is non-corrosive, eliminates dirt and improves conductivity. It reduces mechanical resistance and provides long-term protection against humidity.