Ceramic grease
Reference : PT 0022
Soppec PRO-Tech Ceramic Grease is a high quality metal-free ceramic grease that can be used to treat parts subject to intense pressures and/or exposed to very high temperatures. It offers high thermal stability and protection against electrolytic corrosion. Resistant to humidity and water, salts and weak acids and bases, it reduces wear, prevents seizure and makes it easier to dismantle parts.
Ceramic grease
Description of the PRO-Tech Ceramic Grease
PRO-Tech Ceramic grease is a high-quality, metal-free ceramic grease, for treating parts which are subject to extreme stress and/or are exposed to very high temperatures.
Specifications of the PRO-Tech Ceramic Grease
- Packaging: 400 ml
- Composition: mineral oils, bentonite binder, additives and boron nitride
- Appearance: white paste
- Propellant: propane-butane
- VOC-EU g/l: 494 g/l
- Relative density (20°C g/ml): 0.658
- Vapour pressure at 20°C: 4.8 - 5.4 bar
- Spray flow: 2.3 g/sec
- Withstands temperatures: -40°C to +1,200°C
Applications of the PRO-Tech Ceramic Grease
- Screw connections that are exposed to very high temperatures
- ABS braking systems
- Lambda sensors
- Brake components (rear)
- Exhaust components
- Industrial ovens
Product references
- Shields against electrolytic corrosion
- High thermal stability
- Resistant against chemicals and weather influences
- Resistant against water, salt and weak acids and bases
- Excellent adhesion
- Prevents wear and jamming
- Ideally suited for mounting ABS braking systems and
- Lambda sensors
- Directed spray pattern
- Eases dismantling at a later date
Physical and Chemical Properties
Contents : 400 ML
Base : Mineral oils, bentonite binders, additives and boron nitride
Appearance : White paste
Propellant : Propane-Butane
VOC-CH % : 75%
VOC-EU g/l : 494 g/l
Specific gravity (g/ml 20°C) : 0.658
Vapour pressure at 20°C : 4.8-5.4 bar
Spraying flow rate : 2.3 g/sec
Temperature resistant : -40°C to +1.200°C
PT 0022
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature.
The ideal processing temperature is from 5 to 30°C.
Shake the aerosol can before use.
Apply PRO-Tech Ceramic Grease.
The specific lubricating property has been achieved after evaporation of the solvent (approximately one minute).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
Soppec PRO-Tech Ceramic Grease is a high quality metal-free ceramic grease that can be used to treat parts subject to intense pressures and/or exposed to very high temperatures. It offers high thermal stability and protection against electrolytic corrosion. Resistant to humidity and water, salts and weak acids and bases, it reduces wear, prevents seizure and makes it easier to dismantle parts.