Soppec PRO-Tech Ceramic Grease is a high quality metal-free ceramic grease that can be used to treat parts subject to intense pressures and/or exposed to very high temperatures. It offers high thermal stability and protection against electrolytic corrosion. Resistant to humidity and water, salts and weak acids and bases, it reduces wear, prevents seizure and makes it easier to dismantle parts.
This product is no longer in stock
|Application domain||cleaning, care and maintenance|
|Application area||metallic surface, synthetic, plastic|
|Product type||technical product - lubricant|
|Packaging||Box of 12 cans|
PRO-Tech Ceramic grease is a high-quality, metal-free ceramic grease, for treating parts which are subject to extreme stress and/or are exposed to very high temperatures.
Contents : 400 ML
Base : Mineral oils, bentonite binders, additives and boron nitride
Appearance : White paste
Propellant : Propane-Butane
VOC-CH % : 75%
VOC-EU g/l : 494 g/l
Specific gravity (g/ml 20°C) : 0.658
Vapour pressure at 20°C : 4.8-5.4 bar
Spraying flow rate : 2.3 g/sec
Temperature resistant : -40°C to +1.200°C
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature.
The ideal processing temperature is from 5 to 30°C.
Shake the aerosol can before use.
Apply PRO-Tech Ceramic Grease.
The specific lubricating property has been achieved after evaporation of the solvent (approximately one minute).
DANGEROUS. FOLLOW THE PRECAUTIONS.
CLP labelling with two pictograms.
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.