Copper Spray
Reference : PT 0016
Copper grease is a lubricant containing a high level of copper to prevent the wear and seizure of connecting screws exposed to very high temperatures. It facilitates the assembly and dismantling of bearings and other fittings and prevents seizing. The product repels humidity and is water and corrosion resistant.
Copper Spray
Description of the PRO-Tech Copper Spray
PRO-Tech Copper Spray is a high-quality spray with a high copper content to preventwear and jammingof screw connections that are exposed to very high temperatures.
Specifications of the PRO-Tech Copper Spray
- Packaging: 400 ml
- Composition: blend of grease, mineral oils, copper particles and corrosion inhibitors
- Appearance: copper-coloured paste
- Propellant: propane-butane
- VOC-EU g/l: 469 g/l
- Relative density (20°C g/ml): 0.721
- Vapour pressure at 20°C: 3.5 - 4.1 bar
- Spray flow: 2.3 g/sec
- Withstands temperatures: -40°C to +1,100°C
Applications of the PRO-Tech Copper Spray
- Brake components
- Exhaust components
- Screw connections that are exposed to very high temperatures
- Battery terminals
- Threads of spark plugs
Product references
- High thermal stability
- Resistant against chemicals and weather influences
- Excellent resistance to corrosion
- Excellent adhesion
- Prevents wear and jamming
- Facilitates the later dismantling
- Directed spray pattern
Physical and Chemical Properties
Contents : 400 ML
Base : Mix of greases, mineral oils, copper particles, corrosion inhibitors
Appearance : Copper-coloured pasta
Propellant : Propane-Butane
VOC-CH % : 65%
VOC-EU g/l : 469 g/l
Specific gravity (g/ml 20°C) : 0.721
Vapour pressure at 20°C : 3.5-4.1 bar
Spraying flow rate : 2.3 g/sec
Temperature resistant : -40°C to +1.100°C
PT 0016
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C. Shake the aerosol can before use.
Apply PRO-Tech Copper Spray. The specificlubricating property has been achieved after evaporation of the solvent (approximately one minute).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with three pictograms.
DANGER
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
Copper grease is a lubricant containing a high level of copper to prevent the wear and seizure of connecting screws exposed to very high temperatures. It facilitates the assembly and dismantling of bearings and other fittings and prevents seizing. The product repels humidity and is water and corrosion resistant.