Graisse cuivre View larger

Copper Spray


Copper grease is a lubricant containing a high level of copper to prevent the wear and seizure of connecting screws exposed to very high temperatures. It facilitates the assembly and dismantling of bearings and other fittings and prevents seizing. The product repels humidity and is water and corrosion resistant.

More details

Data sheet

Application domain cleaning, care and maintenance
Application area metallic surface, synthetic, plastic
Product type technical product - lubricant
Volume 400 ml
Packaging Box of 12 cans

More info

Description of the PRO-Tech Copper Spray

PRO-Tech Copper Spray is a high-quality spray with a high copper content to preventwear and jammingof screw connections that are exposed to very high temperatures.


Specifications of the PRO-Tech Copper Spray


  • Packaging: 400 ml
  • Composition: blend of grease, mineral oils, copper particles and corrosion inhibitors
  • Appearance: copper-coloured paste
  • Propellant: propane-butane
  • VOC-EU g/l: 469 g/l
  • Relative density (20°C g/ml): 0.721
  • Vapour pressure at 20°C: 3.5 - 4.1 bar
  • Spray flow: 2.3 g/sec
  • Withstands temperatures: -40°C to +1,100°C


Applications of the PRO-Tech Copper Spray

  • Brake components
  • Exhaust components
  • Screw connections that are exposed to very high temperatures
  • Battery terminals
  • Threads of spark plugs


Product references

  • High thermal stability
  • Resistant against chemicals and weather influences
  • Excellent resistance to corrosion
  • Excellent adhesion
  • Prevents wear and jamming
  • Facilitates the later dismantling
  • Directed spray pattern


Physical and Chemical Properties

Contents : 400 ML

Base : Mix of greases, mineral oils, copper particles, corrosion inhibitors

Appearance : Copper-coloured pasta

Propellant : Propane-Butane

VOC-CH % : 65%

VOC-EU g/l : 469 g/l

Specific gravity (g/ml 20°C) : 0.721

Vapour pressure at 20°C : 3.5-4.1 bar

Spraying flow rate : 2.3 g/sec

Temperature resistant  : -40°C to +1.100°C


Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C. Shake the aerosol can before use.

Apply PRO-Tech Copper Spray. The specificlubricating property has been achieved after evaporation of the solvent (approximately one minute).




Health and safety

CLP labelling with three pictograms.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

picto inflammablepicto dangereux


Safety Data Sheet