Lubrifiant PTFE sec View larger

PTFE dry


A high quality PRO-Tech PTFE Dry Lubricant for mechanical components in metal or synthetic materials that need protection against oil and grease residues. The product forms a dry anti-static film that is virtually invisible, eliminating problems caused by friction on start-up and due to slipping.It is resistant to weather, acids and soft alkalis; it is water-repellent and pH neutral.

More details

Data sheet

Application domain cleaning, care and maintenance
Product type technical product - lubricant
Application area metallic surface, synthetic, plastic
Volume 500 ml
Packaging Box of 12 cans

More info

Description of the PRO-Tech PTFE Dry Lubricant

High-quality dry lubricant based on PTFE for treating metal and plastic mechanical componentsin which no oil or grease can remain. Due to the unique composition the product forms an antistatic, dry and virtually invisible film that reduces the starting and sliding friction to zero. PRO-Tech PTFE Dry has a very low coefficient of friction, a fine texture(particle size approximately 5 micrometres) and a very good adhesion. PTFE Dry is resistant to weather influences and weak acids and alkalis, is water-repellent and pH neutral. It prevents wear and jamming. PRO-Tech PTFE Dry can withstand temperatures from -180°C to + 260°C. PRO-Tech PTFE Dry has a directed spray pattern and can be used at any angle (360°).

Our dry PTFE spray offers a very low friction coefficient, an almost smooth texture, with particles of approximately 5 micrometres, together with very good adhesion.  It therefore reduces wear and seizure for machine and equipment parts, conveyor belts, guide rails, machinery/agricultural parts.


Specifications of the PRO-Tech PTFE Dry Lubricant


  • Packaging: 500 ml
  • Composition: PTFE dispersion, polymers in alcoholic solvents
  • Appearance: clear, slightly cloudy liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 598 g/l
  • Relative density (20°C g/ml): 0.604
  • Vapour pressure at 20°C: 4 - 5 bar
  • Spray flow: 1.1 g/sec
  • Particle size: 3.7 μm
  • Drying time: approximately 5 minutes
  • Withstands temperatures: -180°C to +260°C


Applications of the PRO-Tech PTFE Dry Lubricant

  • Guide rails
  • Windows wipers
  • Conveyor belts
  • Dashboards
  • Tow bars
  • (Agricultural) machinery/ parts    
  • Safety belts
  • Guide rails chairs and windows
  • Moulds
  • Slides          
  • Zippers


Product references

  • Does not leave any grease or oil behind (dry film)
  • Dirt-repellent
  • Silicon-free and antistatic
  • Very low coefficient of friction
  • Excellent adhesion
  • Prevents wear and jamming
  • Resistant to weather influences
  • Resistant to weak acids and bases
  • Suitable for unloading moulds
  • Fine structure (particle size approximately 5 micrometres)        
  • Works as an anti-adhesive
  • Directed spray pattern
  • 360° Valve


Physical and Chemical Properties

  • Contents : 500 ML
  • Base : PTFE dispersion, polymers in alcohol solvents
  • Appearance : Light, slightly murkyliquid
  • Propellant : Propane-Butane
  • VOC-CH % : 99%
  • VOC-EU g/l : 598 g/l
  • Specific gravity (g/ml 20°C) : 0.604
  • Vapour pressure at 20°C : 4 - 5 bar
  • Spraying flow rate : 1.1 g/sec
  • Particle size : 3.7 µm
  • Temperature resistant : -180°C to +260°C
  • Drying time : Approximately 5 minutes


Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C.

Shake the aerosol can before use. Apply the PRO-Tech PTFE Dry in a thin layer. After evaporation of the solvent (approximately5 minutes) a protective, dry PTFE film is formed.




Health and safety

CLP labelling with two pictograms.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux


Safety Data Sheet