PTFE Spray (Oil)
Reference : PT 0004
A high quality PTFE Spray that ensures good lubrication over a long period. Unblocks seized metal or plastic parts; has low friction resistance and is moisture-repellent thus protecting against corrosion. It offers good penetration and good resistance to high pressure.
PTFE Spray (Oil)
Description of the PRO-Tech PTFE Spray
High-quality universal lubricant for treating mechanical parts of metal and plastic. PRO-Tech PTFE Spray has a very low coefficient of friction, a fine texture (particle size approximately 5 micrometres) and a good adhesion. PTFE spray is resistant against weather influences and weak acids and alkalis, is water-repellent and pH neutral. It prevents wear and jamming. PRO-Tech PTFE Spray can withstand temperatures from -50°C to + 250°C.
The PRO-Tech PTFE Spray can be used for any parts with a rolling or sliding movement whether in a dry or damp environment: cogwheels, gearing, hinges, machine tools, etc.
Specifications of the PRO-Tech PTFE Spray
- Packaging: 500 ml
- Composition: blend of aliphatic hydrocarbons and alcohols
- Appearance: clear liquid
- Propellant: CO2
- VOC - CH%: 96%
- VOC-EU g/l: 725 g/l
- Relative density (20°C g/ml): 0.758
- Vapour pressure at 20°C: 5.0 - 5.5 bar
- Spray flow: +/-3.5 g/sec
Applications of the PRO-Tech PTFE Spray
- Chains
- Sprockets
- Hinges of doors
- Industrial vacuum pumps
- Guide rails
- Conveyorbelts
- Guide rails sliding doors
- Hinges and locks
- (Agricultural) machinery
- Rubber Sealing profiles
- Planers
- Saw benches
Product references
- Excellent mechanical and thermal stability
- Very low coefficient of friction
- Excellent adhesion
- Prevents wearand jamming
- Resistant against weather influences
- Resistant against weak acids and alkalis
- Fine texture (particle size approximately 5 micrometres)
- Directed spray pattern
Physical and Chemical Properties
- Contents : 400 ML
- Base : Mineral oils, PTFE and additives
- Appearance : Light, slightly murkyyellow liquid
- Propellant : Propane-Butane
- VOC-CH % : 40%
- VOC-EU g/l : 297 g/l
- Specific gravity (g/ml 20°C) : 0.735
- Vapour pressure at 20°C : 2.8-3.2 bar
- Spraying flow rate : 2.5 g/sec
- Temperature resistant : -50°C to +250°C
- pH value : Neutral
PT 0004
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 400 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C.
Shake the aerosol can before use. Apply the PTFE oil in a thin layer. The best lubrication is obtained after evaporation of the solvent (approximately 1 minute).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H412 Harmful to aquatic life with long lasting effects.
A high quality PTFE Spray that ensures good lubrication over a long period. Unblocks seized metal or plastic parts; has low friction resistance and is moisture-repellent thus protecting against corrosion. It offers good penetration and good resistance to high pressure.