Lubrifiant PTFE View larger

PTFE Spray (Oil)

PRO-Tech

A high quality PTFE Spray that ensures good lubrication over a long period. Unblocks seized metal or plastic parts; has low friction resistance and is moisture-repellent thus protecting against corrosion. It offers good penetration and good resistance to high pressure.

More details


Data sheet

Application domain cleaning, care and maintenance
Product type technical product - lubricant
Application area metallic surface, synthetic, plastic
Volume 400 ml
Packaging Box of 12 cans

More info


Description of the PRO-Tech PTFE Spray

High-quality universal lubricant for treating mechanical parts of metal and plastic. PRO-Tech PTFE Spray has a very low coefficient of friction, a fine texture (particle size approximately 5 micrometres) and a good adhesion. PTFE spray is resistant against weather influences and weak acids and alkalis, is water-repellent and pH neutral. It prevents wear and jamming. PRO-Tech PTFE Spray can withstand temperatures from -50°C to + 250°C.

The PRO-Tech PTFE Spray can be used for any parts with a rolling or sliding movement whether in a dry or damp environment: cogwheels, gearing, hinges, machine tools, etc.

 

Specifications of the PRO-Tech PTFE Spray

 

  • Packaging: 500 ml
  • Composition: blend of aliphatic hydrocarbons and alcohols
  • Appearance: clear liquid
  • Propellant: CO2
  • VOC - CH%: 96%
  • VOC-EU g/l: 725 g/l
  • Relative density (20°C g/ml): 0.758
  • Vapour pressure at 20°C: 5.0 - 5.5 bar
  • Spray flow: +/-3.5 g/sec

 

Applications of the PRO-Tech PTFE Spray

  • Chains
  • Sprockets
  • Hinges of doors
  • Industrial vacuum pumps
  • Guide rails
  • Conveyorbelts
  • Guide rails sliding doors
  • Hinges and locks
  • (Agricultural) machinery
  • Rubber Sealing profiles
  • Planers
  • Saw benches

 

Product references

  • Excellent mechanical and thermal stability
  • Very low coefficient of friction
  • Excellent adhesion
  • Prevents wearand jamming
  • Resistant against weather influences
  • Resistant against weak acids and alkalis
  • Fine texture (particle size approximately 5 micrometres)
  • Directed spray pattern

 

Physical and Chemical Properties

  • Contents : 400 ML
  • Base : Mineral oils, PTFE and additives
  • Appearance : Light, slightly murkyyellow liquid
  • Propellant : Propane-Butane
  • VOC-CH % : 40%
  • VOC-EU g/l : 297 g/l
  • Specific gravity (g/ml 20°C) : 0.735
  • Vapour pressure at 20°C : 2.8-3.2 bar
  • Spraying flow rate : 2.5 g/sec
  • Temperature resistant : -50°C to +250°C
  • pH value : Neutral

 

Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C.

Shake the aerosol can before use. Apply the PTFE oil in a thin layer. The best lubrication is obtained after evaporation of the solvent (approximately 1 minute).

 

DANGEROUS. FOLLOW THE PRECAUTIONS.

 

Health and safety

CLP labelling with two pictograms.

DANGER

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H412 Harmful to aquatic life with long lasting effects.

picto inflammablepicto dangereux

 

Safety Data Sheet