Total Power Grease
Reference : PT 0025
High quality universal lubricant. The white grease spray is liquid when applied to enable deep penetration. It then sets to become a pressure resistant grease. Optimal lubrication is guaranteed, even under high pressure, for a wide range of temperatures. The product protects against corrosion (copper and steel) and is resistant to the damage caused by chemicals and to adverse weather conditions.
Total Power Grease
Description of the PRO-Tech Total Power Grease
PRO-Tech Total Power Grease is a high quality grease that is ideal as a universal lubricant due to its excellent pressure and temperature resistance. Initially it is a liquid when applied so it can penetrate deeply between the parts. Once the solvent has evaporated, solid and pressure-resistant grease remains. Due to thesecharacteristics PRO-Tech Total Power Grease is ideally suited for lubricating components where metal rubs against metal. Total Power Grease is ideal for lubricating door catchers, window mechanisms, pedals, hinges, sprockets, brake components, bearings etc., where it is important that the lubrication takes placebetween and not on the metal. Moreover, it is light in colour, as a result of which it is perfect for use on visible parts.
The product is also visco-static, meaning it retains characteristicswithin a wide temperature rangedue towhich optimal lubrication is ensured. PRO-Tech Total Power Grease is highly resistant to high pressure and high temperatures, from -40°C to +170°C (up to 200°C peak load). Due to its special composition the product is water-repellent and protectsagainst corrosion, while rubber and plastic are not adversely affected. Total Power Grease has a directed spray patternand can be used at any angle (360°).
The white grease spray is ideal for any metal parts that rub against one another (doors, window mechanisms, pedals, hinges, gears, pedal elements, bearings, etc).
Optimal lubrication is guaranteed for a wide range of temperatures (from -40°C and up to peak temperatures of 230°C).
Specifications of the PRO-Tech Total Power Grease
- Packaging: 500 ml
- Composition: mineral oil, lithium soap and EP additives
- Appearance: almost colourless, allowing it to be used on visible parts
- Propellant: propane-butane
- VOC-EU g/l: 539 g/l
- Relative density (20°C g/ml): 0.658
- Vapour pressure at 20°C: 2.5 - 3.1 bar
- Spray flow: 1.8 g/sec
- Withstands temperatures: -40°C to +170°C
Applications of the PRO-Tech Total Power Grease
- Metal on metal
- Hinges
- Door catchers
- Sprockets
- Window mechanisms
- Pedals
- Hinges
- Brake parts
- Bearings
Product references
- Protectsagainst corrosion (copper and steel)
- High-pressure resistance
- Acid-free
- Resistant to chemicals and weather influences
- Penetrates deeply and has excellent adhesion
- Resistant to water, salt and weak acids and bases
- Directed spray pattern
- Prevents wear and jamming
- 360° valve
- Visco-static
- Does not harden
Physical and Chemical Properties
- Contents : 500 ML
- Base : Mineral oil, lithium soap and EP additives
- Appearance : Light brown grease
- Propellant : Propane-Butane
- VOC-CH % : 82%
- VOC-EU g/l : 539 g/l
- Specific gravity (g/ml 20°C) : 0.658
- Vapour pressure at 20°C : 2.5-3.1 bar
- Spraying flow rate : 1.8 g/sec
- Temperature resistant : -40°C to +170°C
PT 0025
Data sheet
- Product type
- Lubricant
- Application area
- Metal, Plastic, Synthetic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
Ideally clean the surface with PRO-Tech Power cleaner before proceeding. The aerosol can should be at room temperature. The ideal processing temperature is from 5 to 30°C. Shake the aerosol can before use. Apply PRO-Tech Total Power Grease to the desiredsurface. The specific lubricating property is achieved after evaporation of the solvent (approximately one minute).
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
PENTANE
HYDROCARBONS, C9-C11, N-ALKANES, ISOALKANES, CYCLICS, < 2%% AROMATICS
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
High quality universal lubricant. The white grease spray is liquid when applied to enable deep penetration. It then sets to become a pressure resistant grease. Optimal lubrication is guaranteed, even under high pressure, for a wide range of temperatures. The product protects against corrosion (copper and steel) and is resistant to the damage caused by chemicals and to adverse weather conditions.