Paint Stripper
Reference : PT 0012
The Soppec PRO TECH Stripper acts rapidly and intensely for a powerful effect. Ideal to remove alkyd resin-based paint or aqueous phase epoxy and polyurethane coatings, even if bicomponent, etc. Can be applied to almost all surfaces.
Paint Stripper
Description of the PRO-Tech Paint Stripper
PRO-Tech Paint Stripper is a highly professional and intensive methylene chloride-free fast acting paint stripper. Applicable for us on virtually any surface and especially suitable for removing alkyd paint, waterborne paint, 1 or 2-components epoxy and polyurethane coatings etc.
Specifications of the PRO-Tech Paint Stripper
- Packaging: 500 ml
- Composition: blend of solvents and paraffin wax, free from methylene chloride
- Propellant: DME
- VOC-EU g/l: 794 g/l
- Relative density (20°C g/ml): 0.794
- Vapour pressure at 20°C: 3.3 - 3.9 bar
- Spray flow: 2.5 g/sec
- pH: neutral
- Usage/ dosage: 2-3 m2/kg, depending on usage
Applications
- Alkyd paint
- Bitumen
- Waterborne paint
- Sealants
- 1 and 2 components coatings
- Adhesives
- Graffiti
- Wood, mineral and metalsurface
Product references
- Methylene chloride-free!
- Biodegradable
- Fast acting
- Active on all types of paint
- Contains no acids, alkalis, NMP, methylene chloride, biocides and preservatives
- Fan nozzle to apply material evenly
Physical and Chemical Properties
- Contents : 500ML
- Base : Mix of solvents and paraffin wax
- Propellant : DME
- VOC-CH % : 100%
- VOC-EU g/l : 794 g/l
- Specific gravity (g/ml 20°C) : 0.794
- Vapour pressure at 20°C : 3.3 - 3.9 bar
- Spraying flow rate : 2.5 g/sec
- pH value : Approximately 8
- Use/ dosing : 2-3 m2/kg, depending on object and processing method andseverity of dirt
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place
- General : Do not use below 5°C. Surface must be frost-free. At low temperatures the effectis delayed
PT 0012
Data sheet
- Product type
- Cleaner, technical product - other
- Application area
- Metal, Plastic, Synthetic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance, Preparion of the supports
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
Cover / protect the surrounding area. Aerosol can should be at room temperature. Processing temperature should be between 5°C and 25°C. Apply the product in a sufficient layer thickness on the surface to be treated. Leave the product for at least 15 minutes. Adjusttheexposure timefor 2-components coatings. Brush, or spray clean with (hot) water under an appropriate high pressure. Remove dissolved paint residue with a scraper or putty knife. If required, repeat the treatment. Rinse with water. Treat as industrial waste, provided fully empty and dry and otherwise in accordance with the Environmental Management Act.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with one pictogram.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
The Soppec PRO TECH Stripper acts rapidly and intensely for a powerful effect. Ideal to remove alkyd resin-based paint or aqueous phase epoxy and polyurethane coatings, even if bicomponent, etc. Can be applied to almost all surfaces.