Air duster
search
  • Air duster

Air Duster (Non-Flammable)

Reference : PT 0133

PRO-Tech Air Duster is a powerful tool for the pressurized removal of dust and loose dirt in hard-to-reach areas. It has been specially developed for the professional and safe cleaning of telephones, cameras, copiers, printers, keyboards, TV's, clocks etc. The product contains a non-combustible gas, is odourless and leaves no residue.

See product's full description

Air Duster (Non-Flammable)

Contact us

Applications of the PRO-Tech Air Duster

 

  • Equipment (Electronic)
  • Telephones
  • Cameras
  • Copiers
  • Medical tools/equipment
  • Printers
  • TVs
  • Clocks
  • Laptops, keyboards

 
Properties of the PRO-Tech Air Duster

 
Powerful, effective tool for safely blowing away dust and loose dirt in hard-to-reach areas. Indispensable when cleaning copier, printer, keyboard, TV, clock, laptop, phone, camera, medical equipment, etc. The non-flammable, odorless gas leaves no residue.

 

PRO-Tech Air Duster references

  • Non-flammable gas
  • 360˚ valve (can be used in all directions)
  • Leaves no residue
  • Less harmful to the environment
  • Easy to use
  • Indispensable cleaning agent when liquid agents are unsuitable

 

Physical and Chemical Properties

  • Content : 400 ML (200 ML)
  • Basis : TRANS-1,3,3,3-TETRAFLUOROPROP-1-ENE
  • Appearance : Gas
  • Propellant : TRANS-1,3,3,3-TETRAFLUOROPROP-1-ENE
  • VOC-CH % : 100%
  • Specific gravity (g/ml 20°C) : 4
  • Vapour pressure at 20°C : 4.0-4.5 bar

  

PRO-TECH ASSORTIMENT FR

Download (1.53MB)

PRO-TECH ASSORTIMENT NL

Download (1.53MB)

PRO-TECH MERK BROCHURE FR

Download (2.01MB)

PRO-TECH MERK BROCHURE NL

Download (2.02MB)

TI_PT0133_EN

Download (262KB)

PT 0133

Data sheet

Product type
technical product - other, Cleaner
Application area
Plaster, Synthetic, Plastic, Metal, Woods
Volume
400 ml
Packaging
Box of 12 cans
Application domain
Maintenance

Instructions for use

 

Before use, carefully read the instructions on the packaging and act accordingly.

Aerosol can should be at room temperature. Always switch off the power before spraying on electronic equipment. Aim the aerosol can at the surface to be cleaned. Do not shake. After the treatment wait until switching on the power until the product has fully vaporised. The best results are obtained by removing dirt with “brief shots”. Let it rest for a while after the treatment, so the internal pressure can recover.