Gas Leak Finder
Reference : PT 0112
For the verification of gas pipes under pressure, providing a rapid, effective and efficient way to detect leaks. Recommended for checking any gas pipework, compressed air installations, couplings, compressors, air pipes, tires, flanges and seals. Easy to use, non-inflammable and non-corrosive. Is removed with water and without any danger to the environment.
Gas Leak Finder
Description of the PRO-Tech Gas Leak Finder
PRO-Tech Gas Leak Finder is a high-quality product for the detection of leakages in gas pipes. User-friendly, fast and safe. The gas leak finder is inflammable and non-corrosive. It can be removed with water and is environmentally friendly. Gas leak finder is slightly alkaline and light foaming. PRO-Tech Gas leak finder can be used at any angle (360°).
Specifications of the PRO-Tech Gas Leak Finder
- Packaging: 500 ml (size 400 ml)
- Composition: blend of corrosion inhibitors and surface active agents
- Appearance: clear slightly foamy liquid
- Propellant: nitrogen
- VOC-EU g/l: 152 g/l
- Relative density (20°C g/ml): 1.017
- Vapour pressure at 20°C: 7.5 - 8.0 bar
- Spray flow: 4.4 g/sec
Applications of the PRO-Tech Gas Leak Finder
- Compressed air systems
- Connectors
- Gas pipes
- Compressors
- Air lines
- Tyres
- Flanged connections
Product references
- Inflammable
- Slightly alkaline
- Light foaming
- Non-corrosive
- High efficiency
- Easily removed with water
- 360° valve
Physical and Chemical Properties
Contents : 300 ML (400ML size)
Base : Mix of surface-active agents and corrosion inhibitors
Appearance : Clear colourless light foaming liquid
Propellant : Nitrogen
VOC-CH % : 15%
VOC-EU g/l : 152 g/l
Specific gravity (g/ml 20°C) : 1.017
Vapour pressure at 20°C : 7.5-8.0 bar
Spraying flow rate : 4.4 g/sec
PT 0112
Data sheet
- Product type
- technical product - other
- Application area
- Metal, Plastic, Synthetic
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance, Security
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
Store frost free.
The aerosol can should be at room temperature.
The ideal processing temperature is 5 to 30°C.
Shake the aerosol can before use.
Apply leak finder on the suspected area to trace the leakage. Bubbles appear at the location of the leakage. Remove residue with water.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with one pictogram.
DANGER
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
For the verification of gas pipes under pressure, providing a rapid, effective and efficient way to detect leaks. Recommended for checking any gas pipework, compressed air installations, couplings, compressors, air pipes, tires, flanges and seals. Easy to use, non-inflammable and non-corrosive. Is removed with water and without any danger to the environment.