Shock Spray
Reference : PT 0021
The PRO-Tech Shock Spray is a perfect solution to release seized or rusted parts. The spray produces a thermal shock that breaks rust and unblocks jammed elements. Ideal for releasing screw fixings, gears, locks, fixing materials, etc.
Shock Spray
Description of the PRO-Tech Shock Spray
PRO-Tech Shock Spray is a high-quality, effective toolfor loosening stuck and rusted parts. By shocking the affected parts with a fast temperature drop, the jammed connection “breaks”, after which the part can be disassembled more easily. PRO-Tech Shockspray has a directed spray patternand can be used at any angle (360°).
Specifications of the PRO-Tech Shock Spray
- Packaging: 200 ml
- Composition: aliphatic and aromatic
- hydrocarbons, low viscosity mineral oils, anticorrosion additives and extra-fine particles
- Appearance: clear red liquid
- Propellant: propane-butane
- COV - CH%: 97%
- VOC-EU g/l: 580 g/l
- Relative density (20°C g/ml): 0.596
- Vapour pressure at 20°C: 3.9 - 4.5 bar
- Spray flow: +/-2 g/sec
Applications of the PRO-Tech Shock Spray
- Screws, bolts and nuts
- Tools
- Screw connections
- Sprockets
- Fixing materials
- Hinges and locks
Product references
- Shock effect
- Penetrating properties
- Fast acting
- Briefly lowers the temperature to -30°C
- Moisture repellent
- Corrosion-resistant
- 360° valve
- Directed spray pattern
Physical and Chemical Properties
- Contents : 200 ML
- Base : Aliphatic and aromatic hydrocarbons, low viscosity mineral oils, anti-corrosion additives and ultrafine particles.
- Appearance : Clear red liquid
- Propellant : Propane-Butane
- VOC-CH % : 97%
- VOC-EU g/l : 580 g/l
- Specific gravity (g/ml 20°C) : 0.596
- Vapour pressure at 20°C : 3.9-4.5 bar
- Spraying flow rate : +/- 2 g/sec
PT 0021
Data sheet
- Product type
- technical product - other
- Application area
- Metal, Plastic, Synthetic
- Volume
- 200 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance
Instructions for use
Before use, carefully read the instructions on the packaging and act accordingly.
The aerosol can should be at room temperature.
The ideal processing temperature is from 5 to 30°C.
Shake the aerosol can before use.
Spray the screw connection to be treated for a few seconds by briefly pressing the spray button severaltimes. Due to the severe temperature drop, in conjunctionwith the penetrating operation of the oil, the screw connection can be loosened.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with two pictograms.
DANGER
HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5%% N-HEXANE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
The PRO-Tech Shock Spray is a perfect solution to release seized or rusted parts. The spray produces a thermal shock that breaks rust and unblocks jammed elements. Ideal for releasing screw fixings, gears, locks, fixing materials, etc.