Zinkspray mat (snel droog)
search
  • Zinkspray mat (snel droog)

Zinc Spray Matte Fast Drying

Reference : PP 0204

A rapid-drying, cold galvanising paint that can be used to provide corrosionprotection for metals, steel and iron, for quick  maintenance during construction or industrial production.

See product's full description

Zinc Spray Matte Fast Drying

Color: Grey

Contact us

Description of the PRO-Paint Zinc Spray Matte Fast Drying

PRO-Paint Zinc spray Matte fast drying is a matte, zinc rich primer. It protects against corrosion on iron and steel and is very fast drying. As a result this product is very suitable for production and construction work. Applications for use are on new, blank or blasted steel or galvanised steel surfaces. Heat resistant up to 250°C.

 

Properties of the PRO-Paint Zinc Spray Matte Fast Drying

 

  • Heat resistant up to 250°C
  • Dust dry after 5 to 10 minutes
  • Touch dry after 10 to 20 minutes
  • Leave to dry for 4 hours between coats

(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)

 

Applications of the PRO-Paint Zinc Spray Matte Fast Drying

  • Iron
  • Steel

 

Product references

Fast drying

Good filling power

Resistant against petrol, chemicals and weather influences

Excellent adhesion

Good spot-weldability (observe zinc vapour)     

Superfast zinc primer

 

Physical and Chemical Properties

  • Contents : 500 ML
  • Base : Acrylate
  • Colour : Grey (matte)
  • VOC content : Approximately 64 m/m %
  • Solids content : Approximately 36 m/m %
  • Heat resistant : Up to 250°C
  • Use : 1 to 2 m2 per layer, depending on object and processing method
  • Drying time :at 23°C and rel. humidity 65%
  • Dust-dry after 5 to 10 minutes
  • Touch-dry after 10 to 20 minutes
  • Hardened / resprayable after 4 hrs
  • (Depending on ambient temperature, humidity and layer thickness)
  • Storage  / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
  • General : Do not use below 10°C. Do not apply outside if threatening rain, frost or in full sunlight. Never place aerosol can on heat source.

  

Specifications of the Galva Zinc Matt Quick Drying 

Composition
Binder: acrylate
Pigments: zinc with a high degree of purity
Propellant: dimethyl ether

PRO-PAINT ASSORTIMENT FR

Download (630.37KB)

PRO-PAINT ASSORTIMENT NL

Download (632.21KB)

PRO-PAINT MERK BROCHURE FR

Download (1.65MB)

PRO-PAINT MERK BROCHURE NL

Download (1.67MB)

PP 0204

Data sheet

Product type
Galva paint
Application area
Metal
Volume
500 ml
Packaging
Box of 12 cans
Application domain
retouch

Instructions for use

  

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. The aerosol can should be at room temperature. Ideal processing temperature 15 to 25°C. Shake the aerosol can well for 2 minutes before use and spray a sample. Distance to the surface to be treated should be approximately 25 to 30 centimetres. Apply the zinc primer in several thin layers. Before applying the next layer, shake the aerosol can again. After drying, if desired a primer and a top coat can be applied. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

DANGEROUS. FOLLOW THE PRECAUTIONS.

  

Health and safety

CLP labelling with two pictograms.

DANGER

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.

picto inflammablepicto dangereux

 

 

Safety Data Sheet