Graffiti Remover
Reference : PP 0700
The solution for almost every graffiti problem. Efficiently removes graffiti from painted, varnished or rendered surfaces and from
Trespa, Plexiglas, polycarbonate sheets, etc, without damage. Can be applied to any type of surface: doors, road signs, blinds, trains, bus and metro, various lacquered and coated materials and Plexiglas.
Graffiti Remover
Description of the PRO-Tech Graffiti Remover
PRO-Tech Graffiti Remover is a premium and user-friendly gel-like product for universal application on closed surfaces. Removes spray paint, markers, latex paint, lipstick etc. from doors, traffic signs, roller shutters, transformer stations, metros, trains, etc. Safely and thoroughly removes graffiti from painted, varnished or coated materials, Trespa, Plexiglas, polycarbonate sheet, etc. without damaging it. Always use on a sample area first!
Specifications of the PRO-Tech Graffiti Remover
- Packaging: 500 ml
- Composition: benzyl alcohol
- Appearance: colourless clear liquid
- Propellant: DME
- VOC-EU g/l: 549 g/l
- Relative density (20°C g/ml): 0.845
- Vapour pressure at 20°C: 3.7 - 4.3 bar
- Spray flow: 1.6 g/sec
Applications of the PRO-Tech Graffiti Remover
Graffiti, marker, latex, paint removal
traffic signs
Applicable on closed/ smoothsurfaces
Ideally suited to apply in small/ closed spaces
Doors, Trespa etc.
Product references
Easy and economical to use
Very effective
Gel-structure
Physical and Chemical Properties
- Contents : 500 ML
- Base : Benzyl alcohol
- Appearance : Clear colourless liquid
- Propellant : DME
- VOC-CH % : 50%
- VOC-EU g/l : 549 g/l
- Specific gravity (g/ml 20°C) : 0.845
- Vapour pressure at 20°C : 3.7-4.3 bar
- Spraying flow rate : 1.6 g/sec
- Storage / Shelf life : At least 12 months in tightly closed original packaging on dry, cool and frost-free place.
- General : Do not use below 10°C. Do not use outside if threatening rain, frost or in the full sun. Never place aerosol can on a heat source.
PP 0700
Data sheet
- Product type
- technical product - other, Cleaner
- Application area
- Plaster, Synthetic, Plastic, Metal, Woods, Bitumens, Concrete
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Maintenance, Preparion of the supports
Instructions of use of the Graffiti removal spray
Apply the graffiti removal spray over the surface to be treated. Leave the anti graffiti to act for at least 5 minutes. Once the graffiti has dissolved, remove it and rinse with soap and water to prevent marks.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Health and safety
CLP labelling with three pictograms.
DANGER
BENZYL ALCOHOL
2-AMINOETHANOL
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H302 + H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H335 May cause respiratory irritation.
The solution for almost every graffiti problem. Efficiently removes graffiti from painted, varnished or rendered surfaces and from
Trespa, Plexiglas, polycarbonate sheets, etc, without damage. Can be applied to any type of surface: doors, road signs, blinds, trains, bus and metro, various lacquered and coated materials and Plexiglas.