MASKER SIGN panel masking paint
Reference : 142107
MASKER SIGN’® is panel masking paint for temporary masking that can easily conceal signboards and display surfaces temporarily.
It is a simple, clean and safe alternative to plastic bags with no risk of being torn off.
MASKER SIGN panel masking paint
MASKER SIGN® IS THE SOLUTION FOR PROVISIONAL MASKING
Properties of the Panel masking paint
- Water-repellent product, resistant to bad weather
- Excellent coverage: up to 5 m2 with one aerosol
- Removed quickly form smooth surfaces with a dry rag
- Quick drying: 10 to 15 min
- Operating temperature: -15°C to 50°C
- Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
DANGEROUS. FOLLOW THE PRECAUTIONS.
Specifications of the S MARK spray marker
Composition
Binder: natural and synthetic waxes.
Pigments: mineral and organic, lead and cadmium-free.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.
Data sheet
- Product type
- marking - additional products, Masking paint, Non fluorescent paint
- Application area
- Synthetic, Plastic, Metal
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Application domain
- Mapping, tracking, picketing, event
Application method
- Use head up: shake vigorously before use.
- After use: purge head down.
- For certain plastics and painted surfaces it is advisable to test beforehand.
- One can is sufficient to temporarily cover approximately 5 m².
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.
DANGER
607-022-00-5 ETHYL ACETATE
EUH208 Contains TURPENTINE, OIL. May produce an allergic reaction.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.